Mechanical and electrical specifications LPR510AL
6/12 Doc ID 15811 Rev 2
2.2 Electrical characteristics
2.3 Absolute maximum ratings
Stresses above those listed as “Absolute maximum ratings” may cause permanent damage
to the device. This is a stress rating only and functional operation of the device under these
conditions is not implied. Exposure to maximum rating conditions for extended periods may
affect device reliability.
Table 4. Electrical characteristics @ Vdd =3 V, T=25 °C unless otherwise noted
(1)
Symbol Parameter Test condition Min. Typ.
(2)
Max. Unit
Vdd Supply voltage 2.7 3 3.6 V
Idd Supply current PD pin connected to GND 6.8 mA
IddPdn
Supply current in
power-down mode
PD pin connected to Vdd 1 5 µA
V
ST Self-test input
Logic 0 level 0 0.2*Vdd
V
Logic 1 level 0.8*Vdd Vdd
V
PD Power-down input
Logic 0 level 0 0.2*Vdd
V
Logic 1 level 0.8*Vdd Vdd
To p
Operating temperature
range
-40 +85 °C
1. The product is factory calibrated at 3 V
2. Typical specifications are not guaranteed
Table 5. Absolute maximum ratings
Symbol Ratings Maximum value Unit
Vdd Supply voltage -0.3 to 6 V
Vin Input voltage on any control pin (PD, ST) -0.3 to Vdd +0.3 V
T
STG
Storage temperature range -40 to +125 °C
A Acceleration
3000 g for 0.5 ms
10000 g for 0.1 ms
ESD Electrostatic discharge protection 2 (HBM) kV
This is a mechanical shock sensitive device, improper handling can cause permanent
damage to the part
This is an ESD sensitive device, improper handling can cause permanent damage to
the part
