OMO ElectronicOMO Electronic
Expand menu
0 Cart

ATS2012UV415

P1-P3P4-P4
© 2018 Kingbright. All Rights Reserved. Spec No: DSAP4753 / 1212000496 Rev No: V.1B Date: 05/09/2018
Page 1 / 4
Part Number
Emitting Color
(Material)
Lens Type
Φe(mW)
[2]
@ 20mA
Viewing
[1]
Angle
Min. Typ. 2θ1/2
ATS2012UV415 Ultraviolet (InGaN) Water Clear 150° 12 18
FEATURES
z 2.0 mm x 1.25 mm SMD LED, 0.75 mm thickness
z Low power consumption
z Wide viewing angle
z Package: 2000 pcs / reel
z Moisture sensitivity level: 1
z RoHS compliant
APPLICATIONS
z Photocatalytic Purification
z Blood and Counterfeit money detection
z UV curing in nail salon, dental, and poster printing
applications
z UV Sensor Light
PACKAGE MATERIALS
z Material as follows:
Package: Ceramics
Encapsulating resin: Silicone resin
Electrodes: Au plating
ATTENTION
Observe precautions for handling
electrostatic discharge sensitive devices
PACKAGE DIMENSIONS
SELECTION GUIDE
Notes:
1. θ1/2 is the angle from optical centerline where the radiant intensity is 1/2 of the optical peak value.
2. Radiant flux: +/-15%.
3. Radiant flux value is traceable to CIE127-2007 standards.
ATS2012UV415
2.0 x 1.25 mm UV LED With Ceramic Substrate
RECOMMENDED SOLDERING PATTERN
(units : mm; tolerance : ± 0.1)
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.25(0.01") unless otherwise noted.
3. The specifications, characteristics and technical data described in the datasheet are subject to
change without prior notice.
4. The device has a single mounting surface. The device must be mounted according to the specifications.
© 2018 Kingbright. All Rights Reserved. Spec No: DSAP4753 / 1212000496 Rev No: V.1B Date: 05/09/2018
Page 2 / 4
ABSOLUTE MAXIMUM RATINGS at T
A
=25°C
ELECTRICAL / OPTICAL CHARACTERISTICS at T
A
=25°C
ATS2012UV415
Notes:
1. Forward voltage: ±0.1V.
2. Wavelength value is traceable to CIE127-2007 standards.
3. Excess driving current and / or operating temperature higher than recommended conditions may result in severe light degradation or premature failure.
Parameter Symbol Value Unit
Wavelength at Peak Emission I
F
= 20mA [Min.]
λ
peak
410
Wavelength at Peak Emission I
F
= 20mA [Typ.] 415
Wavelength at Peak Emission I
F
= 20mA [Max.] 420
Spectral Bandwidth at 50% Φ REL MAX I
F
= 20mA [Typ.] Δλ 15 nm
Forward Voltage I
F
= 20mA [Typ.]
V
F
[1]
3.3
V
Forward Voltage I
F
= 20mA [Max.] 3.8
Reverse Current (V
R
= 5V) [Max.] I
R
50
µA
Temperature Coefficient of V
F
I
F
= 20mA, -10°C ≤ T ≤ 85°C
TC
V
-3.0 mV/°C
nm
Parameter Symbol Value Unit
Power Dissipation P
D
120 mW
Reverse Voltage V
R
5 V
Junction Temperature T
j
115 °C
Operating Temperature T
op
-40 to +85 °C
Storage Temperature T
stg
-40 to +85 °C
DC Forward Current I
F
30 mA
Peak Forward Current I
FM
[1]
100 mA
Thermal Resistance (Junction / Ambient) R
th
JA
[2]
100 °C/W
Thermal Resistance (Junction / Solder point) R
th
JS
[2]
50 °C/W
Notes:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
2. R
th
JA
,R
th
JS
Results from mounting on PC board FR4 (pad size ≥ 16 mm
2
per pad).
3. Relative humidity levels maintained between 40% and 60% in production area are recommended to avoid the build-up of static electricity – Ref JEDEC/JESD625-A and JEDEC/J-STD-033.
© 2018 Kingbright. All Rights Reserved. Spec No: DSAP4753 / 1212000496 Rev No: V.1B Date: 05/09/2018
Page 3 / 4
0.5 0.5
90°
15°
0°
30°
45°
60°
75°
-15°
-30°
-45°
-60°
-75°
-90°
0.01.0 1.0
T
a
= 25 °C
TECHNICAL DATA
0%
20%
40%
60%
80%
100%
350 400 450 500 550 600 650 700 750 800
T
a
= 25 °C
Wavelength (nm)
Relative Intensity (a. u.)
RELATIVE INTENSITY vs. WAVELENGTH
ULTRAVIOLET
SPATIAL DISTRIBUTION
0
10
20
30
40
50
2.7 2.9 3.1 3.3 3.5 3.7
T
a
= 25 °C
Forward voltage (V)
Forward current (mA)
0
0.5
1
1.5
2
2.5
0 1020304050
T
a
= 25 °C
Forward current (mA)
Radiant flux normalised
at 20 mA
0
10
20
30
40
50
-40 -20 0 20 40 60 80 100
Ambient temperature (°C)
Permissible forward current (mA)
0.0
0.5
1.0
1.5
2.0
2.5
-40-200 20406080100
Ambient temperature (°C)
Radiant flux normalised
at T
a
= 25 °C
Forward Current vs.
Forward Voltage
Radiant Flux vs.
Forward Current
Forward Current Derating Curve
Radiant Flux vs.
Ambient Temperature
ATS2012UV415
TAPE SPECIFICATIONS (units : mm)
REEL DIMENSION (units : mm)
REFLOW SOLDERING PROFILE for LEAD-FREE SMD PROCESS
Notes:
1. Don't cause stress to the LEDs while it is exposed to high temperature.
2. The maximum number of reflow soldering passes is 2 times.
3. Reflow soldering is recommended. Other soldering methods are not recommended as they might
cause damage to the product.
P1-P3P4-P4

ATS2012UV415

Mfr. #:
Buy ATS2012UV415
Manufacturer:
Kingbright
Description:
Standard LEDs - SMD 2x1.2mm UV SMD
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet