USA: Sales: 800-490-2361
Technical Support: technicalsupport@pomonatest.com
Fax: 425-446-5844
Europe: 31-(0) 40 2675 150 International: 425-446-5500
Where to Buy: www.pomonaelectronics.com
All dimensions are in inches. Tolerances (except noted): .xx = ±.02” (,51 mm),
.xxx = ± .005” (,127 mm). All specifications are to the latest revisions.
Specifications are subject to change without notice. Registered trademarks are
the property of their respective companies.
Copyright © 2009 D1094889 Rev. 102 Page 2 of 2
Model 6481
Test Connector Adapter Set
Materials
Models: 3560, 3562, 3564 & 4690
Insulation: Polyvinyl chloride (PVC)
Banana Jack Body (upper connector)
Material: Brass.
Finish: Bright Tin plated
Socket (lower connector):
Material: Copper Alloy
Finish: Gold over copper plate
Models: 3561, 3563, 3565 & 4691
Insulation: Polyvinyl chloride (PVC).
Banana Jack Body (upper connector)
Material: Brass.
Finish: Bright Tin plated
Pin (lower connector):
Material: Brass
Finish: Gold plated over electroless nickel.
Model: 6358 Test Leads (male to male)
Straight Sheath Banana Plug:
Insulation: Polypropylene, Color: One Black, One Red
Retractable Sheath Banana Plug:
Compression Spring: Stainless Steel
Tip: Nylon, Color matches Color of Wire
Insulation: Polypropylene Molded to the Plug and Wire. Color Matches Color of Wire.
Plug Body: Brass, Nickel Plated
Banana Spring: Beryllium Copper, Nickel Plated
Wire: 18 AWG, 192 x 41 bare copper, Silicone Insulation, O.D. 0.144” (3,66mm), Color: One Black, One Red
Ratings
Models: 3560, 3562, 3564, 4690, 3561, 3563, 3565 & 4691 only
Operating Voltage: For CE compliance and for personal safety, do not hold in hand when voltages exceed 30
Vrms/42.4 Vpk/60 Vdc. Maximum voltage for hands free use: 2500 Vrms Max. Do not
use on circuits where transient stresses can exceed the rated voltage.
Operating Temperature: +55°C (+131°F) Max.
(6358* only):
Conforms to IEC 61010-031
Operating Voltage: CAT III 1000V
Operating Temperature: +55°C (+131°F) Max.
Current: 10 Amperes
* Connectors with retractable insulation sleeves are only for connection to equipment that is NOT provided with
terminals which accept fully insulated connectors. These connectors provide NO PROTECTION against electric
shock. DO NOT use connectors with retractable insulation sleeves with hand-held probes.
Ordering Information
Model: 6481
Kit contains one red and one black adapter of each model: 3560, 3561, 3562, 3563, 3564, 3565, 4690, 4691 and one
set of Model 6358 test leads.
