Y57872K00000B0L

www.vishayfoilresistors.com
4
VH Hermetic
For any questions, contact
foil@vpgsensors.com
Document No.: 63004
Revision: 14-May-2015
Table 4—Environmental Performance
Group/Parameter
MIL-PRF-55182/9
Characteristic Y Maximum ΔR
VH102K
Typical
(1)
ΔR
VHS102
Typical
(1)
ΔR
VHS555
Typical
(1)
ΔR
Test Group I
Thermal shock
Overload
±0.05%
±0.05%
±0.002%
±0.003%
±0.002%
±0.003%
±0.002%
±0.003%
Test Group II
Resistance temperature characteristics
Temperature storage
Low temperature operation
Terminal strength
±5 ppm/°C
±0.05%
±0.05%
±0.02%
±0.005%
±0.005%
±0.002%
±0.005%
±0.005%
±0.002%
±0.0025%
±0.005%
±0.002%
Test Group III
Dielectric withstanding voltage (DWV)
Insulation resistance
Resistance to solder heat
Moisture resistance
±0.02%
10
4
±0.02%
±0.05%
±0.005%
40 × 10
5
±0.002%
±0.005%
±0.005%
40 × 10
5
±0.002%
±0.005%
±0.002%
40 × 10
5
±0.002%
±0.005%
Test Group IV
Shock
Vibration
±0.01%
±0.02%
±0.002%
±0.002%
±0.002%
±0.002%
±0.002%
±0.002%
Test Group V
Life test at 0.3 W/+125°C 2000 h
10 000 h
±0.05%
±0.5%
±0.03%
±0.05%
±0.03%
±0.05%
±0.01%
±0.02%
Test Group Va
+70°C power rating ±0.05% ±0.02% ±0.02% ±0.02%
Test Group VI
High temperature exposure ±0.05% ±0.05% ±0.05% ±0.04%
Test Group VII
Voltage coefficient 0.0005%/V <0.00001% <0.00001%/V <0.00001%/V
Note:
(1)
Maximum is 1.0 % A.Q.L. standard for all specifications except TCR. (For TCR information see notes
(3)
to
(7)
on previous page.)
Typical is a designers reference which represents that 85% of the units supplied, over a long period of time, will be at least the
figure shown or better.
www.vishayfoilresistors.com
5
VH Hermetic
For any questions, contact
foil@vpgsensors.com
Document No.: 63004
Revision: 14-May-2015
Figure 4—Global Part Number Information
Note
* Application engineering release: for non-standard requests, please contact application engineering.
NEW GLOBAL PART NUMBER:Y578780K5000V9L (preferred part number format)
*REAEULAVNOISICERP SETONED
RY = Ω
K =
M = MΩ
0 = standard product, tin/lead terminations
9 = standard product, lead (Pb)-free terminations
Other = custom
GNIGAKCAPECNARELOT ECNATSISEREDOC TCUDORP
0077 = VHS102
0788 = VH102J
5787 = VH102K
0787 = VH102L
0087 = VHS555
V = ±0.005%
T = ±0.01%
Q = ±0.02%
A = ±0.05%
B = ±0.1%
C = ±0.25%
D = ±0.5%
F = ±1.0%
L = bulk pack
FOR EXAMPLE: ABOVE GLOBAL ORDER Y5787 80K5000 V 9 L:
TYPE: VH102K
VALUE: 80.5 kΩ
ABSOLUTE TOLERANCE: ±0.005%
TERMINATION: lead (Pb)-free
PACKAGING: bulk pack
HISTORICAL PART NUMBER:VH102KT 8K500 VB(will continue to be used)
BV005K08TK201HV
MODELTERMINATIONOHMIC VALUE
RESISTANCE
TOLERANCE
PACKAGING
VHS102
VH102J
VH102K
VH102L
VHS555
T = lead (Pb)-free
None = tin/lead alloy
80K500 = 80.5 kΩ V = ±0.005%
T = ±0.01%
Q = ±0.02%
A = ±0.05%
B = ±0.1%
C = ±0.25%
D = ±0.5%
F = ±1.0%
B = bulk pack
7878 K500Y5 V90 L0
Vishay Precision Group, Inc.
www.vpgsensors.com
1
Legal Disclaimer Notice
Document No.: 63999
Revision: 15-Jul-2014
Disclaimer
ALL PRODUCTS, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE.
Vishay Precision Group, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf
(collectively, “VPG”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in
any other disclosure relating to any product.
The product specifications do not expand or otherwise modify VPG’s terms and conditions of purchase, including but
not limited to, the warranty expressed therein.
VPG makes no warranty, representation or guarantee other than as set forth in the terms and conditions of purchase.
To the maximum extent permitted by applicable law, VPG disclaims (i) any and all liability arising out of the
application or use of any product, (ii) any and all liability, including without limitation special, consequential or
incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose,
non-infringement and merchantability.
Information provided in datasheets and/or specifications may vary from actual results in different applications and
performance may vary over time. Statements regarding the suitability of products for certain types of applications
are based on VPG’s knowledge of typical requirements that are often placed on VPG products. It is the customer’s
responsibility to validate that a particular product with the properties described in the product specification is suitable for
use in a particular application. You should ensure you have the current version of the relevant information by contacting
VPG prior to performing installation or use of the product, such as on our website at vpgsensors.com.
No license, express, implied, or otherwise, to any intellectual property rights is granted by this document, or by any
conduct of VPG.
The products shown herein are not designed for use in life-saving or life-sustaining applications unless otherwise
expressly indicated. Customers using or selling VPG products not expressly indicated for use in such applications do
so entirely at their own risk and agree to fully indemnify VPG for any damages arising or resulting from such use or sale.
Please contact authorized VPG personnel to obtain written terms and conditions regarding products designed for such
applications.
Product names and markings noted herein may be trademarks of their respective owners.
Copyright Vishay Precision Group, Inc., 2014. All rights reserved.
Disclaimer
Legal Disclaimer Notice

Y57872K00000B0L

Mfr. #:
Manufacturer:
Vishay Precision Group
Description:
Metal Foil Resistors - Through Hole 2Kohms .1% .6w
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union