OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

JB15LPC-JC

P1-P3P4-P6
J
Series JB
Illuminated Low Profile Process Sealed Tactiles
www.nkk.com
J28
Indicators
AccessoriesSupplement
Tactiles
KeylocksRotaries
Pushbuttons
Illuminated PB
Slides
Programmable
Rockers
Touch Tilt
Toggles
Electrical Capacity (Resistive Load)
Low/Logic Level: 50mA @ 24V DC maximum for Standard Operating Force models
125mA @ 24V DC maximum for High Operating Force models
Other Ratings
Standard Operating Force High Operating Force
Contact Resistance: 50 milliohms maximum 50 milliohms maximum
Insulation Resistance: 500 megohms minimum @ 250V DC 500 megohms minimum @ 250V DC
Dielectric Strength: 250V AC minimum for 1 minute minimum 250V AC minimum for 1 minute minimum
Mechanical Life: 5,000,000 operations minimum 1,000,000 operations minimum
Electrical Life: 5,000,000 operations minimum 1,000,000 operations minimum
Nominal Operating Force: 1.76N for JB15L 2.65N for JB15HL & JB15HB
Total Travel: .010” (.254mm) .012” (.300mm)
Materials & Finishes
Actuator: Polyacetal for Short; Glass fiber reinforced PBT for Extended
Case: Glass fiber reinforced polyamide (UL94V-0)
Seal: Nitrile butadiene rubber
Base: Glass fiber reinforced PBT (UL94V-0)
Movable Contacts: Stainless steel
Stationary Contacts: Brass with silver plating
Terminals: Brass with silver plating
Environmental Data
Operating Temperature Range: –25°C through +70°C (–13°F through +158°F)
Humidity: 90 ~ 95% humidity for 240 hours @ 40°C (104°F)
Vibration: 10 ~ 55Hz with peak-to-peak amplitude of 1.5mm traversing the frequency range & returning
in 1 minute; 3 right angled directions for 2 hours
Shock: 50G (490m/s
2
) acceleration (tested in 6 right angled directions, with 5 shocks in each direction)
PCB Processing
Soldering: Wave Soldering recommended. See Profile A in Supplement section.
Manual Soldering: See Profile A in Supplement section.
Cleaning: Automated cleaning. See Cleaning specifications in Supplement section.
Standards & Certifications
Flammability Standards: UL94V-0 rated case & base
The JB Series tactiles have not been tested for UL recognition or CSA certification.
These switches are designed for use in a low-voltage, low-current, logic-level circuit.
When used as intended in a logic-level circuit, the results do not produce hazardous energy.
General Specifications
J
Series JB
Illuminated Low Profile Process Sealed Tactiles
www.nkk.com
J29
Indicators
AccessoriesSupplement Tactiles KeylocksRotaries PushbuttonsIlluminated PBSlides Programmable Rockers
Touch
Tilt
Toggles
1
2
3
65
4
7
8
9
B
0
A
9
13
10
6
11
8
12
72
1
3
4
5
1
2
3
4
5
6
7
8
9
0
A
B
1234 56789101112
13
= ON
Keys (Switches)
PC Terminations
1
2
3
65
4
7
8
9
B
0
A
1
2
6
7
34
5
1
2
3
4
5
6
7
8
9
0
A
B
1234 567
= ON
Keys (Switches)
PC Terminations
Common Bus Matrix
These single pole, single throw switches can be used in a key-
board matrix and, using strapped terminals, achieve a com-
mon bus electrical configuration on a single-sided PC board.
X-Y Matrix
These single pole, single throw switches can be
arranged on a single-sided PC board matrix
with strapped terminals to achieve an X-Y type
electrical interconnection.
Choice of dimensions from PCB to top of cap adds to design flexibility.
Bright, full-face illumination with red, green, or yellow LEDs
for attractive, functional panel layouts.
Higher operating force type provides more pronounced
operating feel.
Dome contact gives crisp tactile feedback to positively
indicate circuit transfer and assures high reliability
and long life of up to 5,000,000 operations.
Rubber seal construction prevents contact contamination
and allows automated soldering and cleaning.
Slanted terminals provide a spring type action which ensures
secure mounting and prevents dislodging during wave soldering.
Molded-in terminals are part of the sealed construction which allows
automated soldering and cleaning.
Terminal spacing conforms to standard .100” (2.54mm) PCB grid.
Actual Size
Distinctive Characteristics
Red = PCB Trace Black = Switch Circuit
J
Series JB
Illuminated Low Profile Process Sealed Tactiles
www.nkk.com
J30
Indicators
AccessoriesSupplement
Tactiles
KeylocksRotaries
Pushbuttons
Illuminated PB
Slides
Programmable
Rockers
Touch Tilt
Toggles
Pole & Circuit
15 SPST OFF (ON)
( ) = Momentary
15
C
JB
SPST
OFF-(ON) Circuit
Operating Force
No
Code
Standard
(L actuator only)
H High
DESCRIPTION FOR TYPICAL ORDERING EXAMPLE
JB15LPC-JC
L JC
Short Actuator
P
Terminals
P Straight PC
Actuators
L Short
B
Extended
(H operating force only)
Cap Types & Colors
Flat Cap Colors
B Translucent White
C Red
E Yellow
F Green
Flat Cap
Lens/Diffuser Colors
JB Clear/White
JC Clear/Red
JE Clear/Yellow
JF Clear/Green
For JC, JE & JF, diffuser
color must match LED color
Framed Cap
Button/Frame Colors
BB White/White
BC White/Red
BE White/Yellow
BF White/Green
BH White/Gray
Straight PC Terminals
LED Colors
C Red
E Yellow
F Green
POLE & CIRCUIT
Actuator Position
( ) = Momentary
Switch Throw
& Schematic LED Schematic
Pole &
Throw Model
Normal Down
SPST
Notes: Terminal numbers
are shown on switch.
LED circuit is isolated
& requires external
power source.
SPST JB15 OFF (ON)
Red LED
Flat Cap with
Clear Lens and Red Diffuser
Standard Operating Force
(+) (-)
1
2
3
4
TYPICAL SWITCH ORDERING EXAMPLE
P1-P3P4-P6

JB15LPC-JC

Mfr. #:
Buy JB15LPC-JC
Manufacturer:
NKK Switches
Description:
Tactile Switches SPST ILLUM RED
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet