OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

SE2604L-R

P1-P3P4-P6P7-P9
DATA SHEET
SE2604L: 2.4 GHz High Power Wireless LAN Power Amplifier
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
202437B • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • May 12, 2014 1
Applications
IEEE802.11b DSSS WLAN
IEEE802.11g,n OFDM WLAN
High Power Wireless Networking Products
Features
Dual Mode IEEE802.11b, IEEE802.11g,
IEEE802.11n
23 dBm, EVM = 3%, 802.11g, OFDM 54 Mbps
26 dBm, ACPR < -32 dBc, 802.11b
Integrated PA, Input Match, 2.8V reference
voltage generator
Integrated Temperature Compensated, Positive
Slope Power Detector
Pb-free, RoHS compliant and Halogen-free
3 mm x 3 mm x 0.6 mm QFN, MSL 3
Ordering Information
Part No. Package Remark
SE2604L 16 pin QFN Samples
SE2604L-R 16 pin QFN Tape & Reel
SE2604L-EK1 N/A Evaluation kit
Product Description
The SE2604L is a high power 802.11bgn WLAN
power amplifier module providing the functionality of
the power amplifier, power detector, reference voltage
generator and input match.
The SE2604L is designed for ease of use and
maximum flexibility, with an integrated input match,
and external output match to adjust the load line for
either 3.3V, 23dBm operation.
The SE2604L includes a temperature compensated
transmit power detector with over 20 dB of dynamic
range and <1.2dB variation under 3:1 mismatch at the
antenna.
The SE2604L includes a digital enable control due to
an integrated reference voltage generator. The power
ramp rise/fall time is 0.5 s typical.
Functional Block Diagram
Figure 1: Functional Block Diagram
DET
EN
RFIN
VCC1
50Ω
RFOUT
VCC2
Bias & Control
V
CC0
DET
DATA SHEET
SE2604L: 2.4 GHz High Power Wireless LAN Power Amplifier
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
202437B • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • May 12, 2014 2
Pin Out Diagram
Figure 2: SE2604L Pin Out (Top View Through Package)
Pin Out Description
Pin No. Name Description
1 RF IN RF Input
2 EN Power Amplifier Enable
3 GND Ground
4 VCC0 Power Supply for Bias Circuit
5 GND Ground
6 GND Ground
7 DET Power Detector Output
8 NC No Connect. May be left floating or grounded.
9 GND Ground
10 RF OUT RF Output
11 RF OUT RF Output
12 GND Ground
13 VCC2 Power Supply for 2
nd
Stage
14 NC No Connect. May be left floating or grounded.
15 VCC1 Power Supply driver stages
16 GND Ground
Die paddle GND Ground
GND
RF OUT
RF OUT
GND
1
2
3
12
11
10
765
141516
V
CC2
NC
V
CC1
GND
Ground Paddle
13
8
4 9
NC
DET
GND
GND
RF IN
EN
GND
VCC0
DATA SHEET
SE2604L: 2.4 GHz High Power Wireless LAN Power Amplifier
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
202437B • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • May 12, 2014 3
Absolute Maximum Ratings
These are stress ratings only. Exposure to stresses beyond these maximum ratings may cause permanent damage
to, or affect the reliability of the device. Avoid operating the device outside the recommended operating conditions
defined below. This device is ESD sensitive. Handling and assembly of this device should be at ESD protected
workstations.
Symbol Definition Min. Max. Unit
VCC Supply Voltage on VCC -0.3 4.0 V
VIN DC input on EN -0.3 3.6 V
TX RF Input Power with RF Out terminated in 50 - 12.0 dBm
TA Operating Temperature Range -40 85 °C
TSTG Storage Temperature Range -40 150 °C
ESD
HBM
JEDEC JESD22-A114
all pins
- 1,000 V
Recommended Operating Conditions
Symbol Parameter Min. Typ. Max. Unit
TA Ambient temperature -40 25 85 °C
VCC Supply voltage, relative to GND = 0 V 2.9 3.3 3.6 V
DC Electrical Characteristics
Conditions: VCC = EN = 3.3 V, TA = 25 C, as measured on Skyworks Solutions’ SE2604L-EV1 evaluation board
(de-embedded to device), all unused ports terminated with 50 ohms, unless otherwise noted
Symbol Parameter Conditions Min. Typ. Max. Unit
ICC-G Total Supply Current
POUT = 23 dBm, 54 Mbps
OFDM signal, 64QAM
300 410 460 mA
ICC-B Total Supply Current
P
OUT
= 26 dBm, 11 Mbps
CCK signal, BT = 0.45
400 450 560 mA
ICC_OFF Total Supply Current EN = 0 V, No RF Applied - 10 100 A
Logic Characteristics
Conditions: VCC = EN = 3.3 V, TA = 25 C, as measured on Skyworks Solutions’ SE2604L-EV1 evaluation board
(de-embedded to device), all unused ports terminated with 50 ohms, unless otherwise noted.
Symbol Parameter Conditions Min. Typ. Max. Unit
VENH Logic High Voltage (Module On) - 1.8 - VCC V
VENL Logic Low Voltage (Module Off) - 0 - 0.4 V
IENH Input Current Logic High Voltage - - 300 - A
IENL Input Current Logic Low Voltage
V
ENL
= 0.4V
- 1 50 A
P1-P3P4-P6P7-P9

SE2604L-R

Mfr. #:
Buy SE2604L-R
Manufacturer:
Skyworks Solutions, Inc.
Description:
RF Amplifier 2.4GHz 802.11bgn 3.3Volt -40C +85C
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet