MP6411―WINDOWED WATCHDOG TIMER
MP6411 Rev. 1.0 www.MonolithicPower.com 3
1/6/2016 MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited.
© 2016 MPS. All Rights Reserved.
PACKAGE REFERENCE
VCC
NC
/WD_DIS
TIMER
WDI
WDO
MODE
GND
TOPVIEW
ABSOLUTE MAXIMUM RATINGS
(1)
All pins ……………………...............-0.3V to +6V
Continuous power dissipation (T
A
= +25°C)
(2)
SOIC8 ………… ........…………1.3W
Junction temperature…………... …………150°C
Lead temperature ………… ...... …………260°C
Storage temperature………….. -65°C to +150°C
Recommended Operating Conditions
(3)
Supply voltage (V
IN
)…………......................... 5V
Operating junction temp. (T
J
) ..... -40°C to 125°C
Thermal Resistance
(4)
θ
JA
θ
JC
SOIC-8…..………………………96……45…C/W
Notes:
1) Exceeding these ratings may damage the device.
2) The maximum allowable power dissipation is a function of the
maximum junction temperature T
J
(MAX), the junction-to-
ambient thermal resistance θ
JA
, and the ambient temperature
T
A
. The maximum allowable continuous power dissipation at
any ambient temperature is calculated by P
D
(MAX) = (T
J
(MAX)-T
A
)/θ
JA
. Exceeding the maximum allowable powe
dissipation will cause an excessive die temperature, causing
the regulator to go into thermal shutdown. Internal thermal
shutdown circuitry protects the device from permanent
damage.
3) The device is not guaranteed to function outside of its
operating conditions.
4) Measured on JESD51-7, 4-layer PCB.