ACPL-P481-000E

ACPL-P481 and ACPL-W481
Inverted Logic, High CMR Optocoupler for Intelligent
Power Modules and IGBT/MOSFET Gate Drive
Data Sheet
CAUTION: It is advised that normal static precautions be taken in handling and assembly
of this component to prevent damage and/or degradation which may be induced by ESD.
Features
Inverted output type (totem pole output)
Performance Specied for Common IPM Applications
Over Industrial Temperature Range.
Short Maximum Propagation Delays
Minimized Pulse Width Distortion (PWD)
Very High Common Mode Rejection (CMR)
Hysteresis
Available in Stretched SO-6 Package.
Package Clearance/Creepage at 8 mm (ACPL-W481)
Safety Approval: (pending)
UL Recognized with 3750 V
rms
(5000 Vrms for
ACPL-W481) for 1 minute per UL1577.
CSA Approved.
IEC/EN/DIN EN 60747-5-5 Approved with V
IORM
=
891 V
peak
for ACPL-P481 and V
IORM
= 1140 V
peak
for
ACPL-W481, under option 060.
Specications
Wide Operating Temperature Range: –40°C to 100°C.
Maximum Propagation Delay t
PHL
/ t
PLH
= 350 ns
Maximum Pulse Width Distortion (PWD) = 250 ns.
Propagation Delay Dierence: Min. –100 ns, Max. 250 ns
Wide Operating V
CC
Range: 4.5 V to 20 V
20 kV/µs Minimum Common Mode Rejection (CMR) at
V
CM
= 1000 V.
Truth Table (Positive Logic)
LED V
O
ON LOW
OFF HIGH
Description
The high-speed ACPL-P481/W481 optocoupler contains
a GaAsP LED, photo detector and a Schmitt trigger that
eliminates the need for external waveform conditioning
circuits.
The totem pole output eliminates the need for a pull-up
resistor. An Intelligent Power Module, Power MOSFET or
IGBT can be driven directly.
Propagation delay dierence between devices has been
minimized to maximize inverter eciency through
reduced switching dead time.
Applications
IPM Interface Isolation
Isolated IGBT/MOSFET Gate Drive
AC and Brushless DC Motor Drives
Industrial Inverters
General Digital Isolation
Functional Diagram
Note: A 0.1 µF bypass capacitor must be connected between pins 4 and 6.
Ground
V
CC
Anode
N.C.
Cathode
V
O
61
52
43
SHIELD
2
Package Outline Drawings
ACPL-P481 Stretched SO-6 Package, 7 mm clearance
Ordering Information
ACPL-P481/W481 is UL recognized with 3750/5000 Vrms for 1 minute respectively per UL 1577. Both are approved under
CSA Component Acceptance Notice #5, File CA 88324.
Part number
Option
Package
Surface
Mount
Tape
& Reel
IEC/EN/DIN EN
60747-5-5 QuantityRoHS Compliant
ACPL-P481
ACPL-W481
-000E
Stretched
SO-6
X 100 per tube
-500E X X 1000 per reel
-060E X X 100 per tube
-560E X X X 1000 per reel
To order, choose a part number from the part number column and combine with the desired option from the option
column to form an ordering part number.
Example 1:
ACPL-P481-560E: Stretched SO-6 Surface Mount package in Tape and Reel packaging with IEC/EN/DIN EN 60747-5-5
Safety Approval and RoHS compliant.
Example 2:
ACPL-P481-000E: Stretched SO-6 Surface Mount package in tube packaging and RoHS compliant.
Option datasheets are available. Contact your Avago sales representative or authorized distributor for information.
1.590
±0.127
0.063
±0.005
6.81
0.268
0.45
0.018
9.7
±0.250
0.382
±0.010
7.62
0.300
0.20
±0.10
0.008
±0.004
1
±0.250
0.040
±0.010
0.254
±0.050
0.010
±0.002
45°
5
NOM.
0.381
±0.127
0.015
±0.005
1.27
BSG
0.050
4.580
0
+
0.254
0.180
-
0.000
+
0.010
3.180
±0.127
0.125
±0.005
10.7
0.421
2.16
0.085
0.76
0.030
1.27
0.050
Floating Lead Protusions max. 0.25 [0.01]
Dimensions in Millimeters [ Inches ]
Lead Coplanarity= 0.1mm [0.004 Inches ]
3
ACPL-W481 Stretched SO-6 Package, 8 mm clearance
Regulatory Information
The ACPL-P481/W481 is approved by the following organizations:
1.270
0.050
11.500
±0.25
0.453
±0.010
6.807
-0.000
+
0.127
0.268
-
0.000
+
0.005
1.590
±0.127
0.063
±0.005
0.20
±0.10
0.008
±0.004
[0.0295
±
0.010]
0.750
±0.250
45°
0.45
0.018
0.254
±0.050
0.010
±0.002
[0.300]
7.62
35
°
NOM.
4.580
0
+
0.254
0.180
-
0.000
+
0.010
0.381
±0.127
0.015
±0.005
1.27
BSG
0.050
1
2
3
4
5
6
3.180
±0.127
0.125
±0.005
12.650
0.498
0.760
0.030
1.905
0.075
Floating Lead protusion max. 0.25[0.01]
Dimensions in millimeters [inches]
Lead Coplanarity=0.1mm [0.004 inches]
IEC/EN/DIN EN 60747-5-5 (Option 060 only)
Approved with Maximum Working Insulation Voltage
V
IORM
= 891 V
peak
for ACPL-P481 and V
IORM
= 1140 V
peak
for ACPL-W481
UL
Approval under UL 1577, component recognition
program up to
V
ISO
= 3750 V
RMS
(5000 Vrms for ACPL-W481). File E55361.
CSA
Approval under CSA Component Acceptance Notice #5,
File CA 88324.
Recommended Pb-Free IR Prole
The recommended reow prole is per JEDEC Standard, J-STD-020 (latest revision). Non-halide ux should be used.

ACPL-P481-000E

Mfr. #:
Manufacturer:
Broadcom / Avago
Description:
Logic Output Optocouplers 5MBd Optocoupler
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union