https://www.phoenixcontact.com/us/products/1417787
10/20/2015Page1/2
Housing screw connection-SACC-BP-F-FIX/NUT-GN-THR-1417787
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's
documentation. Our General Terms of Use for Downloads are valid
(http://phoenixcontact.com/download)
Fixing sleeve for M12 housing screw connection with tolerance-compensating function, for THR solderable M12
socket contact inserts.
Key Commercial Data
Packing unit 1 pc
Minimum order quantity 10 pc
Weight per Piece (excluding packing) 2.0 g
Custom tariff number 39269097
Country of origin Germany
Technical data
Ambient conditions
Ambient temperature (operation) -25 °C ... 85 °C (Plug / socket)
-40 °C ... 85 °C (without mechanical actuation)
Degree of protection IP67
General
Note
The electrical and mechanical data specified assume that the connector
pair is correctly locked and mounted. If the connector is unlocked and if
there is a danger of contamination, the connector must be sealed using
a protective cap > IP54. Influences arising from litz wires, cables or PCB
assembly must also be taken into consideration.
Standards/regulations M12 connector IEC61076-2-101 In line with
Torque 0.6 Nm (Tightening torque of mating connector)
Mounting type Rear mounting 2-section, lockable
Material
Flammability rating according to UL 94 V0
Sealing material FKM (O-ring (pin connector pattern))