N390-05M-12-AP

Singlemode can support 40GBASE-PLR4/100GBASE-PSM4 in applicable parallel optics networks
MTP/MPO (APC) Singlemode Patch Cable (F/F),
12 Fiber, 40/100 GbE, QSFP+ 40GBASE-PLR4,
Plenum, Push/Pull Tab, Yellow, 5 m (16 ft.)
MODEL NUMBER: N390-05M-12-AP
Premium 8.3/125 singlemode fiber optic cabling for transmitting 40/100 Gb data and voice signals over
long distances. Designed for enterprise applications in wiring closets, telecom rooms and data centers.
Description
The N390-05M-12-AP MTP/MPO Singlemode Patch Cable (F/F) supports 40/100 Gb Ethernet speeds
and is designed for QSFP+ applications in enterprise installations in wiring closets, telecom rooms and
data centers. With two female MTP/MPO connectors, this singlemode fiber optic cable with plenum-rated
jacket is recommended for connecting switches, hubs, routers and other high-speed network components
in ceilings, walls and ducts.
The 12-fiber MTP/MPO connectors are about the same size as SC connectors, but are 12 times denser,
freeing up rack space for other cables. The APC connectors are angled to prevent infrared light entering
the fiber from bouncing back into the laser. The N390-05M-12-AP is tested for low insertion loss and back
reflection on every connector and attenuation loss that meets or exceeds current standards.
The N390-05M-12-AP is colored yellow for instant identification in a crowded switch or patch panel as a
singlemode cable. Push/pull tab connectors are easily accessible in high-density data center
environments and make the plug-and-play cable easy to install and remove with one hand.
Features
8.3/125 Rated Singlemode Cable for 40/100 Gb Ethernet Applications
Designed for enterprise applications in wiring closets, telecom rooms and data centers
Recommended for QSFP+ applications in enterprise installations
Plenum-rated jacket suited for ceilings, walls and ducts
Highlights
Push/pull tab connectors easily
install/remove with one hand
12-fiber MTP/MPO connectors
with 12x density of SC
connectors
100% tested for low insertion
loss and back reflection
Angled APC connectors protect
laser against destabilization
Yellow color for easy
singlemode identification
Package Includes
N390-05M-12-AP MTP/MPO
Singlemode Patch Cable (F/F),
Yellow, 5 m
1 / 3
Specifications
Yellow-colored for identification as a singlemode cable
MTP/MPO APC Connectors with Push/Pull Tabs
12-fiber female connectors 12 times denser than SC connectors
APC connector angled to prevent light from reflecting back into laser
Push/pull tabs easy to install and remove with one hand
100% tested for low insertion loss and back reflection
OVERVIEW
UPC Code 037332205384
Technology MTP/MPO; Singlemode
INPUT
Cable Length (ft.) 16.4
Cable Length (m) 5
PHYSICAL
Shipping Dimensions (hwd / in.) 9.000 x 7.000 x 0.500
Shipping Dimensions (hwd / cm) 22.86 x 17.78 x 1.27
Shipping Weight (lbs.) 0.1200
Shipping Weight (kg) 0.05
Color Yellow
ENVIRONMENTAL
Operating Temperature Range -4 to 140 F (-20 to 60 C)
Storage Temperature Range -4 to 140 F (-20 to 60 C)
COMMUNICATIONS
Network Speed 10Gbps / 40Gbps / 100Gbps
CONNECTIONS
Side A - Connector 1 12-STRAND MTP (FEMALE)
Side B - Connector 1 12-STRAND MTP (FEMALE)
WARRANTY
Product Warranty Period
(Worldwide)
Lifetime limited warranty
2 / 3
© 2018 Tripp Lite. All rights reserved. All product and company names are trademarks or registered trademarks of their respective holders. Use of them does
not imply any affiliation with or endorsement by them. Tripp Lite has a policy of continuous improvement. Specifications are subject to change without notice.
Tripp Lite uses primary and third-party agencies to test its products for compliance with standards. See a list of Tripp Lite's testing agencies:
https://www.tripplite.com/products/product-certification-agencies
3 / 3

N390-05M-12-AP

Mfr. #:
Manufacturer:
Tripp Lite
Description:
Fiber Optic Cable Assemblies Singlemode Patch Cable
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet