Data Sheet HMC1162
Rev. A | Page 5 of 11
PIN CONFIGURATION AND FUNCTION DESCRIPTIONS
Figure 2. Pin Configuration
Table 3. Pin Function Descriptions
Pin No. Mnemonic Description
1 to 4, 6 to 10, 13 to 18, 20, 22 to
28, 30 to 32
NC No Connect. These pins are not internally connected. However, these pins can be
connected to RF/dc ground without affecting the performance of the device.
5, 11 GND Ground. These pins must be connected to RF/dc ground.
12 RFOUT/2 Half Frequency Output. This pin is ac-coupled.
19 RFOUT RF Output. This pin is ac-coupled.
29 VTUNE Control Voltage and Modulation Input. The modulation bandwidth is dependent on the
drive source impedance.
EP Exposed Pad. The package bottom has an exposed metal pad that must be connected
to RF/dc ground.
9 10 11 12 13 14 15
16
32 31 30 29 28 27 26 25
NC
NC
NC
VTUNE
NC
NC
NC
NC
NC
NC
GND
RFOUT/2
NC
NC
NC
NC
NC
NOTES
1. NC = NO CONNEC
T. THESE PINS ARE NOT INTERNALLY
CONNECTED. HOWEVER, THESE PINS CAN BE CONNECTED
TO RF/DC GROUND WITHOUT AFFECTING THE PERFORMANCE
OF THE DEVICE.
2. THE PACKAGE BOTTOM HAS AN EXPOSED MET
AL P
AD THAT
MUST BE CONNECTED TO RF/DC GROUND.
HMC1162LP5E
TOP VIEW
(Not to Scale)
NC
NC
V
CC
NC
RFOUT
NC
NC
24
23
22
21
20
19
18
17
1
2
3
4
5
6
7
8
NC
NC
NC
NC
GND
NC
NC
NC
13066-002