NOTES:
1. All dimensions are in mm (inches).
2. This package conforms to JEDEC Standard MS-012, Variation AA, Rev. F.
3. Dimension does not include mold flash, protrusions, or gate burrs. Mold flash, protrusions, or gate burrs shall not exceed 0.15mm per end.
4. Dimension does not include interlead flash or protrusion. Interlead flash or protrusion shall not exceed 0.25mm per side.
5. Pin location tolerance = 0.10mm, pin tolerances are non-cumulative.
6. Dimensions in inches are calculated from mm, and are provided for convenience.
Recommended PCB Land Pattern
Dimensions
mm MIN - mm MAX
(inches MIN - inches MAX)
1.75 MAX
(0.069 MAX)
0.10 - 0.25
(0.004 - 0.010)
4.80 - 5.00
(0.189 - 0.197)
Note 3
Pin 1
0.31 - 0.51
(0.012 - 0.020)
x8
5.80 - 6.20
(0.228 - 0.244)
3.80 - 4.00
(0.150 - 0.157)
Note 4
1.27
(0.050)
5.40
(0.213)
1.55
(0.061)
0.60
(0.024)
1.25 MIN
(0.049 MIN)
0.40 - 1.27
(0.016 - 0.050)
0.10 - 0.25
(0.004 - 0.010)
0º - 8º
Gauge Plane
Seating Plane
A
0.25 (0.010)
A
1.27
(0.05)
6x
For additional information please visit www.ixysic.com
IXYS Integrated Circuits Division makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and
reserves the right to make changes to specifications and product descriptions at any time without notice. Neither circuit patent licenses or indemnity are expressed
or implied. Except as set forth in IXYS Integrated Circuits Division’s Standard Terms and Conditions of Sale, IXYS Integrated Circuits Division assumes no liability
whatsoever, and disclaims any express or implied warranty relating to its products, including, but not limited to, the implied warranty of merchantability, fitness for a
particular purpose, or infringement of any intellectual property right.
The products described in this document are not designed, intended, authorized, or warranted for use as components in systems intended for surgical implant into
the body, or in other applications intended to support or sustain life, or where malfunction of IXYS Integrated Circuits Division’s product may result in direct physical
harm, injury, or death to a person or severe property or environmental damage. IXYS Integrated Circuits Division reserves the right to discontinue or make changes
to its products at any time without notice.
Specifications: DS-IX9908-R02
© Copyright 2015, IXYS Integrated Circuits Division
All rights reserved. Printed in USA.
10/2/2015
