VS-SD2000C..L Series
www.vishay.com
Vishay Semiconductors
Revision: 04-Apr-14
2
Document Number: 93540
For technical questions within your region: DiodesAmericas@vishay.com
, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Note
• The table above shows the increment of thermal resistance R
thJ-hs
when devices operate at different conduction angles than DC
FORWARD CONDUCTION
PARAMETER SYMBOL TEST CONDITIONS VALUES UNITS
Maximum average forward current
at heatsink temperature
I
F(AV)
180° conduction, half sine wave
Double side (single side) cooled
2100 (1040) A
55 (85) °C
Maximum RMS forward current I
F(RMS)
25 °C heatsink temperature double side cooled 3900
A
Maximum peak, one-cycle forward,
non-repetitive surge current
I
FSM
t = 10 ms
No voltage
reapplied
Sinusoidal half wave,
initial T
J
= T
J
maximum
23 900
t = 8.3 ms 25 000
t = 10 ms
100 % V
RRM
reapplied
20 100
t = 8.3 ms 21 000
Maximum I
2
t for fusing I
2
t
t = 10 ms
No voltage
reapplied
2857
kA
2
s
t = 8.3 ms 2608
t = 10 ms
100 % V
RRM
reapplied
2020
t = 8.3 ms 1844
Maximum I
2
t for fusing I
2
t t = 0.1 to 10 ms, no voltage reapplied 28 570 kA
2
s
Low level value of threshold voltage V
F(TO)1
(16.7 % x x I
F(AV)
< I < x I
F(AV)
), T
J
= T
J
maximum 0.74
V
High level value of threshold voltage V
F(TO)2
(I > x I
F(AV)
), T
J
= T
J
maximum 0.86
Low level value of forward
slope resistance
r
f1
(16.7 % x x I
F(AV)
< I < x I
F(AV)
), T
J
= T
J
maximum 0.13
mW
High level value of forward
slope resistance
r
f2
(I > x I
F(AV)
), T
J
= T
J
maximum 0.12
Maximum forward voltage drop V
FM
I
pk
= 6000 A, T
J
= T
J
maximum, t
p
= 10 ms sinusoidal wave 1.55 V
THERMAL AND MECHANICAL SPECIFICATIONS
PARAMETER SYMBOL TEST CONDITIONS VALUES UNITS
Maximum junction operating
temperature range
T
J
-40 to 180
°C
Maximum storage temperature range T
Stg
-55 to 200
Maximum thermal resistance,
junction to heatsink
R
thJ-hs
DC operation single side cooled 0.073
K/W
DC operation double side cooled 0.031
Mounting force, ± 10 %
14 700
(1500)
N
(kg)
Approximate weight 255 g
Case style See dimensions - link at the end of datasheet DO-200AB (B-PUK)
R
thJ-hs
CONDUCTION
CONDUCTION ANGLE
SINUSOIDAL CONDUCTION RECTANGULAR CONDUCTION
TEST CONDITIONS UNITS
SINGLE SIDE DOUBLE SIDE SINGLE SIDE DOUBLE SIDE
180° 0.009 0.009 0.006 0.006
T
J
= T
J
maximum K/W
120° 0.011 0.011 0.011 0.011
90° 0.014 0.014 0.015 0.015
60° 0.020 0.020 0.021 0.021
30° 0.036 0.036 0.036 0.036
