LH1550AAB1, LH1550AAB1TR, LH1550AT1
www.vishay.com
Vishay Semiconductors
Rev. 1.9, 25-Jul-11
1
Document Number: 83841
For technical questions, contact: optocoupleranswers@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
1 Form A High-Voltage Solid-State Relay
DESCRIPTION
The LH1550 is robust, ideal for telecom and ground fault
applications. It is an SPST normally open switch (1 form A)
that replaces electromechanical relays in many applications.
It is similar to the LH1540, but has a characteristically higher
On resistance. It is constructed using a GaAIAs LED for
actuation control and an integrated monolithic die for the
switch output. The die, fabricated in a high-voltage
dielectrically isolated technology, is comprised of a
photodiode array, switch control circuitry and MOSFET
switches. In addition, it employs current-limiting circuitry
which meets lightning surge testing as per ANSI/TIA-968-B
and other regulatory voltage surge requirements when
overvoltage protection is provided.
FEATURES
• Current limit protection
• Isolation test voltage 5300 V
RMS
• Typical R
ON
28
• Load voltage 350 V
• Load current 120 mA
• High surge capability
• Clean bounce free switching
• Low power consumption
• SMD lead available on tape and reel
• Compliant to RoHS Directive 2002/95/EC and in
accordance to WEEE 2002/96/EC
APPLICATIONS
• General telecom switching
• Instrumentation
• Industrial controls
i179041-2
DIP
SMD
AGENCY APPROVALS
UL1577: file no. E52744 system code H, double protection
BSI: 7979/7980
DIN EN: 60747-5-2 (VDE 0884)/60747-5-5 (pending),
available with option 1
FIMKO: 25419
ORDERING INFORMATION
LH1550###1TR
PART NUMBER
ELECTR.
VARIATION
PACKAGE
CONFIG.
NO DC
CONTACT
AT PIN 5
TAPE AND
REEL
PACKAGE UL, BSI, FIMKO
SMD-6 LH1550AAB1
SMD-6, tape and reel LH1550AAB1TR
DIP-6, thru hole LH1550AT1
ABSOLUTE MAXIMUM RATINGS (T
amb
= 25 °C, unless otherwise specified)
PARAMETER TEST CONDITION SYMBOL VALUE UNIT
INPUT
LED continuous forward current I
F
50 mA
LED reverse voltage I
R
10 μA V
R
8V
OUTPUT
DC or peak AC load voltage I
L
50 μA V
L
350 V
Continuous DC load current -
bidirectional operation
I
L
100 mA
Peak load current (single shot) t = 100 ms I
P
(1)
> 0.1 mm
7.62 mm
DIP
SMD