OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 visibleLED@optekinc.com www.optekinc.com
Issue A.2 09/08
Page 1 of 1
OPA733 Series
1 Watt Light Spot on
OptoTherm Linear Heat Spreader
OPA733 Series
• 1 watt LED on round substrate
• Mono-color per strip (Blue, Green, Red, Yellow, White)
• Two component beam angle options (120° or 40°)
• Universal connector (Tyco 2-292173-2 mates with 173977-2)
• RoHS Compliant
The OPA733 Series are designed for areas where lighting intensity and reliability
are essential. The light beam angles of 40° and 120° are ideal for illuminating small and medium size areas while
requiring minimal space. A High Performance Heat Spreader (HPHS) is used to ensure the best heat dissipation
of any light assembly in the industry.
For custom colors and design contact your OPTEK representative.
Product Photo Here
RoHS
OPA733_ (120° Beam Angle)
OPA733_D (40° Beam Angle)
DO NOT LOOK DIRECTLY AT LED
WITH UNSHIELDED EYES OR
DAMAGE TO RETINA MAY
OCCUR.
OPA733_
See OVSP_BCR4 for
component specifications
See OVSP_4CR44 for
component specifications
OPA733_D
Electrical / Optical Characteristics: T
A
=25°C, I
F
=350mA
Part Number Typical Forward Voltage (V) Luminous Flux (lm) Beam Angle Color
OPA733Y 2.5 26 Yellow
OPA733B 3.6 9 Blue
OPA733G 3.6 48 Green
OPA733R 2.5 35 Red
OPA733W 3.6 48 White
OPA733YD 2.5 26
40°
Yellow
OPA733BD 3.6 9 Blue
OPA733GD 3.6 48 Green
OPA733RD 2.5 35 Red
OPA733WD 3.6 48 White
120°
Dominant Wavelength
587 nm
470 nm
530 nm
625 nm
6,500°K
587 nm
470 nm
530 nm
625 nm
6,500°K
4X Ø0.125 [Ø3.18]
0.070±0.010 [1.78±0.25]
0.300 Typ. [7.62]
2X Ø0.160 [Ø4.06]
1.365±0.015 [34.67±0.38]
Ø1.500 [Ø38.10]
1.408 [35.76]
0.222 [5.65]
0.460 [11.68]
0.920 [23.37]
0.460 [11.68]
0.920 [23.37]
+ Voltage
Ground
