3
Integrated
Circuit
Systems, Inc.
ICS9DB801
1015B—09/07/06
PIN # PIN NAME
PIN
TYPE
DESCRIPTION
25 GND PWR Ground pin.
26 PD# IN
Asynchronous active low input pin, with 120Kohm internal pull-
up resistor, used to power down the device. The internal clocks
are disabled and the VCO and the crystal are stopped.
27 SRC_STOP# IN Active low input to stop SRC outputs.
28 HIGH_BW# IN
3.3V input for selecting PLL Band Width
0 = High, 1= Low
29 DIF_4# OUT 0.7V differential complement clock outputs
30 DIF_4 OUT 0.7V differential true clock outputs
31 VDD PWR Power supply, nominal 3.3V
32 GND PWR Ground pin.
33 DIF_5# OUT 0.7V differential complement clock outputs
34 DIF_5 OUT 0.7V differential true clock outputs
35 OE_5 IN
Active high input for enabling outputs.
0 = tri-state outputs, 1= enable outputs
36 OE_6 IN
Active high input for enabling outputs.
0 = tri-state outputs, 1= enable outputs
37 DIF_6# OUT 0.7V differential complement clock outputs
38 DIF_6 OUT 0.7V differential true clock outputs
39 VDD PWR Power supply, nominal 3.3V
40 OE_INV IN
This latched input selects the polarity of the OE pins.
0 = OE pins active high, 1 = OE pins active low (OE#)
41 DIF_7# OUT 0.7V differential complement clock outputs
42 DIF_7 OUT 0.7V differential true clock outputs
43 OE_4 IN
Active high input for enabling outputs.
0 = tri-state outputs, 1= enable outputs
44 OE_7 IN
Active high input for enabling outputs.
0 = tri-state outputs, 1= enable outputs
45 LOCK OUT
3.3V output indicating PLL Lock Status. This pin goes high
when lock is achieved.
46 IREF IN
This pin establishes the reference current for the differential
current-mode output pairs. This pin requires a fixed precision
resistor tied to ground in order to establish the appropriate
current. 475 ohms is the standard value.
47 GNDA PWR Ground pin for the PLL core.
48 VDDA PWR 3.3V power for the PLL core.
Pin Desri
tion for OE_INV = 0
