OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

2902005

P1-P3P4-P6P7-P9P10-P10
https://www.phoenixcontact.com/us/products/2902005
09/06/2016Page1/10
Isolation amplifier-MINI MCR-2-NAM-2RO-PT-2902005
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's
documentation. Our General Terms of Use for Downloads are valid
(http://phoenixcontact.com/download)
Configurable NAMUR signal conditioner with plug-in connection technology for proximity sensors, floating switch
contacts, and switch contacts with resistance circuit. 2 transistor outputs. Configurable via DIP switch. Push-in
connection technology.
Product Description
Configurable NAMUR 4-way signal conditioner with plug-in connection technology for operating proximity sensors according to EN 60947-5-6, floating
switch contacts, and switch contacts with resistance circuit. Two transistor outputs are available on the output side. The second output can be used
either for duplicating signals or for signaling faults on the sensor line. You can configure the signal conditioner via DIP switches. The device supports
fault monitoring and NFC communication.
Why buy this product
Floating contacts and contacts with resistance circuit can be connected
Power supply possible via the foot element (TBUS)
Highly compact isolation amplifier for electrical isolation, amplification, and duplication of proximity sensor signals
For proximity sensors according to IEC 60947-5-6 and EN 50227
Second output can be used as a duplicator or error signaling output
Error indication via diagnostic LED and analog signal
N/O contacts at output
Input and output signals can be configured via DIP switches
3-way isolation
Key Commercial Data
Packing unit 1 STK
Weight per Piece (excluding packing) 100.000 g
Custom tariff number 85437090
Country of origin Germany
Technical data
Note
https://www.phoenixcontact.com/us/products/2902005
09/06/2016Page2/10
Isolation amplifier-MINI MCR-2-NAM-2RO-PT-2902005
Technical data
Note
Utilization restriction
EMC: class A product, see manufacturer's declaration in the download
area
Dimensions
Width 6.2 mm
Height 110.5 mm
Depth 120.5 mm
Ambient conditions
Ambient temperature (operation) -40 °C ... 70 °C
Ambient temperature (storage/transport) -40 °C ... 85 °C
Degree of protection IP20
Power supply
Nominal supply voltage 24 V DC
Supply voltage range
9.6 V DC ... 30 V DC (The DIN rail bus connector (ME 6,2 TBUS-2 1,5/5-
ST-3,81 GN, Order No. 2869728) can be used to bridge the supply
voltage. It can be snapped onto a 35 mm DIN rail according to EN60715))
Typical current consumption 18 mA (24 V DC)
35 mA (12 V DC)
Power consumption 450 mW (9.6 V DC)
Connection data
Connection method Push-in connection
Single conductor/terminal point, solid, with ferrule, min. 0.14 mm²
Single conductor/terminal point, solid, with ferrule, max. 2.50 mm²
Single conductor/terminal point, solid, without ferrule, min. 0.14 mm²
Single conductor/terminal point, solid, without ferrule, max. 2.50 mm²
Conductor cross section flexible min. 0.14 mm²
Conductor cross section flexible max. 2.5 mm²
Min. AWG conductor cross section, flexible 24
Max. AWG conductor cross section, flexible 12
Stripping length 10 mm
General
No. of channels 1
Status display Yellow LED (switching output)
Yellow LED (switching output)
Electrical isolation Reinforced insulation in accordance with IEC 61010-1
Overvoltage category II
Degree of pollution 2
https://www.phoenixcontact.com/us/products/2902005
09/06/2016Page3/10
Isolation amplifier-MINI MCR-2-NAM-2RO-PT-2902005
Technical data
General
Rated insulation voltage 300 V (effective)
Test voltage, input/output/supply 3 kV (50 Hz, 1 min.)
Electromagnetic compatibility Conformance with EMC directive
Noise emission EN 61000-6-4
Noise immunity
EN 61000-6-2 When being exposed to interference, there may be minimal
deviations.
Color gray
Housing material PBT
Mounting position any
Assembly instructions
The T connector can be used to bridge the supply voltage. It can be
snapped onto a 35 mm DIN rail according to EN 60715.
Conformance CE-compliant
ATEX  II 3 G Ex nA IIC T4 Gc X
UL, USA/Canada UL 508 Listed
Class I, Div. 2, Groups A, B, C, D T6
Class I, Zone 2, Group IIC T6
GL GL applied for
EMC data
Designation Electromagnetic RF field
Standards/regulations EN 61000-4-3
Designation Fast transients (burst)
Standards/regulations EN 61000-4-4
Designation Conducted interferences
Standards/regulations EN61000-4-6
Standards and Regulations
Electromagnetic compatibility Conformance with EMC directive
Noise emission EN 61000-6-4
Standards/regulations EN 61000-4-2
Designation Electromagnetic RF field
Standards/regulations EN 61000-4-3
EN 61000-4-4
EN 61000-4-5
Designation Conducted interferences
Standards/regulations EN61000-4-6
Electrical isolation Reinforced insulation in accordance with IEC 61010-1
Conformance CE-compliant
ATEX  II 3 G Ex nA IIC T4 Gc X
P1-P3P4-P6P7-P9P10-P10

2902005

Mfr. #:
Buy 2902005
Manufacturer:
Phoenix Contact
Description:
Isolation Amplifiers MINI MCR2-NAM-2RO-PT
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet