OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

LQH2HPZ220MGRL

P1-P3P4-P6P7-P8
Spec No.JELF243A-9128A-01 P1/8
MURATA MFG.CO., LTD
Reference Only
CHIP COIL (CHIP INDUCTORS) LQH2HPZ□□□□GRL
Murata Standard Reference Specification【AEC-Q200】
1.Scope
This reference specification applies to Chip coil (Chip Inductors) LQH2HPZ_GR Series for Automotive Electronics
based on AEC-Q200 except for Power train and Safety.
2.Part Numbering
(ex) LQ H 2H P Z 1R0 M G R L
Product ID
Structure
Dimension
Applications Category Inductance Tolerance Dimension
Other Packaging
(L×W)
and
(T)
L:φ180Taping
Characteristics
3.Rating
Operating Temperature Range
(Ambient temperature; Self-temperature rise is not included) -40 to +105°C
(Product temperature; Self- temperature rise is included) -40 to +125°C
Storage Temperature Range. -40 to +105°C
Customer
Part
Number
MURATA
Part Number
Inductance
DC
Resistance
(Ω)
Self
Resonant
Frequency
(MHz min)
Rated Current (mA)
ESD
5A: 8kV
∗1 Based on
Inductance
change
∗2 Based on
Temperature rise
(μH)
Tolerance
(%)
∗3 Ambient
temperature
(85 )℃
∗4 Ambient
temperature
(105 )℃
LQH2HPZR47MGRL
0.47
M:±20
0.045±20% 120 2900 2520 1470
5A
LQH2HPZR68MGRL
0.68
0.055±20% 110 2430 2330 1350
LQH2HPZ1R0MGRL
1.0
0.068±20% 100 2130 2100 1200
LQH2HPZ1R5MGRL
1.5
0.087±20% 90 1700 1850 1110
LQH2HPZ2R2MGRL
2.2
0.134±20% 80 1550 1470 850
LQH2HPZ3R3MGRL
3.3
0.225±20% 70 1230 1100 660
LQH2HPZ4R7MGRL
4.7
0.300±20% 50 1090 1000 570
LQH2HPZ6R8MGRL
6.8
0.395±20% 40 830 860 490
LQH2HPZ100MGRL
10
0.560±20% 30 700 710 430
LQH2HPZ150MGRL
15
0.925±20% 20 570 560 310
LQH2HPZ220MGRL
22
1.360±20% 15 460 430 250
∗1:When applied Rated current to the Products , Inductance will be within ±30% of initial inductance value range.
∗2:
Keep the temperature(ambient temperature plus self-generation of heat) under 125 . ℃
∗3: When applied rated current to the Products, temperature rise caused by self-generated heat shall be limited to 40 max.℃
(Ambient temperature 85℃）.
∗4:When applied rated current to the Products,temperature rise caused by self-generated heat shall be limited to 20 ℃
max.(Ambient temperature 85-105℃）.
4. Testing Conditions
《Unless otherwise specified》 《In case of doubt》
Temperature : Ordinary Temperature (15 to 35°C) Temperature
: 20 ± 2°C
Humidity
: Ordinary Humidity (25 to 85 %(RH) Humidity : 60 to 70 %(RH)
Atmospheric Pressure : 86 to 106 kPa
Spec No.JELF243A-9128A-01 P2/8
MURATA MFG.CO., LTD
Reference Only
5.Appearance and Dimensions
6.Electrical Performance
No. Item Specification Test Method
6.1 Inductance Inductance shall meet item 3. Measuring Equipment : KEYSIGHT 4192A or equivalent
Measuring Frequency: 1MHz
6.2 DC Resistance DC Resistance shall meet item 3. Measuring Equipment: Digital multi meter
6.3 Self Resonant
Frequency
(S.R.F)
S.R.F shall meet item 3. Measuring Equipment: KEYSIGHT E4991A or equivalent
7. AEC-Q200 Requirement
7.1 Performance (based on Table 5 for Magnetics(Inductors / Transformer)
AEC-Q200 Rev.D issued June. 1 2010
AEC-Q200
Murata Specification / Deviation
No Stress Test Method
3 High
Temperature
Exposure
1000hours at 125 deg C
Set for 24hours at room
temperature, then measured.
Meet Table A after testing.
Table A
4 Temperature
Cycling
1000cycles
-40 deg C to + 105deg C
Set for 24hours at room
temperature,then measured.
Meet Table A after testing.
7 Biased Humidity 1000hours at 85 deg C,
85%RH
unpowered.
Meet Table A after testing.
8 Operational Life
A
pply Rated Current 85 deg C
1000 hours
Set for 24hours at room
temperature, then measured
Meet Table A after testing.
9 External Visual Visual inspection
No abnormalities
10 Physical
Dimension
Meet ITEM 5
(Style and Dimensions)
No defects
■Unit Mass（Typical value）
0.019ｇ
Appearance No damage
Inductance(at 1MHz) Within ±10%
DC Resistance Change Within ±10%
0.62±0.2
0.62±0.2
2.5±0.2 2.0±0.2
2.0±0.2
0.9±0.1
Spec No.JELF243A-9128A-01 P3/8
MURATA MFG.CO., LTD
Reference Only
AEC-Q200
Murata Specification / Deviation
No Stress Test Method
12 Resistance
to Solvents
Per
MIL-STD-202
Method 215
Not Applicable
13 Mechanical Shock
Per MIL-STD-202
Method 213
Condition C
100g’s/6ms/Half sine
Meet Table A after testing.
14 Vibration 5g's for 20 minutes,
12cycles eah of 3 orientations
Test from 10-2000Hz.
Meet Table A after testing.
15 Resistance
to Soldering Heat
No-heating
Solder temperature
260C+/-5 deg C
Immersion time 10s
Pre-heating: 150 to 180C /90±30s
Meet Table B after testing.
Table B
17 ESD Per AEC-Q200-002 ESD Rank: Refer to Item 3. Rating
No defects
18 Solderbility Per J-STD-002 Method b : Not Applicable
95% of the terminations is to be soldered.
(Except exposed wire)
19 Electrical
Characterization
Measured : Inductance No defects
20 Flammability Per UL-94 Not Applicable
21 Board Flex Epoxy-PCB(1.6mm)
Deflection 2mm(min)
60s minimum holding time
Holding time: 5s
Meet Table A after testing.
22 Terminal Strength Per AEC-Q200-006
A force of 17.7N for 60s
Murata deviation request: 10N for 60s
No defects
8. Specification of Packaging
8.1 Appearance and Dimensions of plastic tape
(in mm)
Dimension of the Cavity is
measured at the bottom side.
.
（0.25
）
1.1±0.1
2.0±0.05
4.0±0.1
4.0±0.1
2.3±0.1
2.8±0.1
8.0±0.2
（2.75）
3.5±0.05
1.75±0.1
Φ1.5
+0.1
-0
Appearance No damage
Inductance(at 1MHz) Within ±20%
DC Resistance Change Within ±10%
P1-P3P4-P6P7-P8

LQH2HPZ220MGRL

Mfr. #:
Buy LQH2HPZ220MGRL
Manufacturer:
Murata Electronics
Description:
Fixed Inductors 1008 22uH 20% 460mA 1.632ohms
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet