CD143A-SR70

* RoHS Directive 2002/95/EC Jan. 27, 2003 including annex and RoHS Recast 2011/65/EU June 8, 2011.
** Bourns follows the prevailing definition of “halogen free” in the industry. Bourns considers a product to be “halogen free” if (a) the Bromine (Br) content is 900 ppm or less;
(b) the Chlorine (Cl) content is 900 ppm or less; and (c) the total Bromine (Br) and Chlorine (Cl) content is 1500 ppm or less.
Specifications are subject to change without notice.
The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time.
Users should verify actual device performance in their specific applications.
CD143A-SR70 – Steering Diode Array Series
Features
Lead free as standard
RoHS compliant*
Halogen free**
ESD protection
Protects 2 lines
Low leakage current: <1 µA
Low capacitance: 3 pF
Applications
Cell phones
Desktops
Laptops & notebooks
Portable electronics
General Information
Electrical Characteristics (@ T
A
= 25 °C Unless Otherwise Noted)
Thermal Characteristics (@ T
A
= 25 °C Unless Otherwise Noted)
*Measured between I/O pins and ground. 3 pF typical between I/O pins.
The CD143A-SR70 device provides ESD protection for the external
ports of portable electronic devices such as cell phones, handheld
electronics and personal computers. The device also provides EFT
and surge protection.
The ESD protection provided by the component enables a data
port to withstand a minimum ±8 KV Contact / ±15 KV Air Discharge
per the ESD test method specified in IEC 61000-4-2. The device
measures 2.80 mm x 1.20 mm and is available in a SOT-143
package intended to be mounted directly onto an FR4 printed
circuit board.
Parameter Symbol Min. Nom. Max. Unit
Capacitance @ 0 V 1 MHz* Cj 10 pF
Repetitive Peak Reverse Voltage 70 V
Reverse Breakdown Voltage I @ 50 µA VBR 85 V
Forward Clamping Voltage 8/20 µs IPP @ 1 A VFC 1.5 V
Forward Clamping Voltage 8/20 µs IPP @ 24 A VFC 7 V
Reverse Leakage Current @ VRRM IR 1 µA
ESD Protection: IEC 61000-4-2
Contact Discharge
Air Discharge
±8
±15
kV
kV
EFT Protection: IEC 61000-4-4 @ 5/50 ns 40 A
Surge Protection: IEC 61000-4-5 @ 8/20 µs
Level 2 (Line-Gnd) & Level 3 (Line-Line)
24 A
Parameter Symbol Min. Nom. Max. Unit
Forward Peak Pulse Current (tp = 8/20 µs ) IPP 24 A
Operating Temperature Range TJ -55 25 +150 °C
Storage Temperature Range TSTG -55 25 +150 °C
1
2
4
3
*RoHS COMPLIANT
Specifications are subject to change without notice.
The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time.
Users should verify actual device performance in their specific applications.
CD143A-SR70 – Steering Diode Array Series
Product Dimensions
Recommended Pad Layout
B
D
I
K
E
G
H
F
J
C
A
MM
(INCHES)
DIMENSIONS:
1.90
(0.075)
1.70
(0.067)
1.20
(0.047)
0.80
(0.031)
0.85
(0.033)
0.85
(0.033)
0.85
(0.033)
1.05
(0.041)
1.90
(0.075)
2.75
(0.108)
2.85
(0.112)
MM
(INCHES)
DIMENSIONS:
Dimensions
A
2.80 - 3.04
(0.110 - 0.12)
B
1.78 - 2.03
(0.070 - 0.080)
C
2.11 - 2.48
(0.083 - 0.098)
D
1.20 - 1.39
(0.047 - 0.055)
E
0.39 - 0.50
(0.015 - 0.020)
F
0.79 - 0.93
(0.031 - 0.037)
G
0.08 - 0.15
(0.003 - 0.006)
H
0.46 - 0.60
(0.018 - 0.024)
I
0.84 - 1.14
(0.033 - 0.045)
J
0.72 - 0.83
(0.028 - 0.033)
K
0.013 - 0.10
(0.0005 - 0.004)
This is a molded JEDEC SOT-143 device. It weighs approximately 35 mg and has a
flammability rating of UL 94V-0. The dimensions for the packaged device are shown below.
Block Diagram
1
2
4
3
This is the footprint recommended for this SOT-143 device.
Typical Part Marking
CD143A-SR70..............................................................................PSA
The device block diagram below includes the pin names and basic
electrical connections associated with each channel.
Device Pin Out
Pin Function
1 V
N
2 I/O 1
3 I/O 2
4 V
P
Specifications are subject to change without notice.
The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time.
Users should verify actual device performance in their specific applications.
CD143A-SR70 – Steering Diode Array Series
Packaging Information
How To Order
CD 143A - SR 70
Common Code
Chip Diode
Package
143A = SOT-143
Model
SR = Steering Diode Array
Repetitive Peak Reverse Voltage
70 = 70 V
RWM
(Volts)
REV. 07/14
The surface mount product is packaged in an 8 mm x 4 mm tape and reel format per EIA-481 standard.
Item Symbol SOT-143
Carrier Width A
2.75 ±0.10
(0.108 - 0.004)
Carrier Length B
3.30 ±0.10
(0.130 - 0.004)
Carrier Depth C
1.25 ±0.10
(0.049 - 0.004)
Sprocket Hole d
1.55 ±0.05
(0.061 - 0.002)
Reel Outside Diameter D
178
(7.008)
Reel Inner Diameter D
1
50.0
(1.969)
Min.
Feed Hole Diameter D
2
13.0 ±0.20
(0.512 - 0.008)
Sprocket Hole Position E
1.75 ±0.10
(0.069 - 0.004)
Punch Hole Position F
3.50 ±0.05
(0.138 - 0.002)
Punch Hole Pitch P
4.00 ±0.10
(0.157 - 0.004)
Sprocket Hole Pitch P
0
4.00 ±0.10
(0.157 - 0.004)
Embossment Center P
1
2.00 ±0.05
(0.079 - 0.002)
Overall Tape Thickness T
0.20 ±0.10
(0.008 - 0.004)
Tape Width W
8.00 ±0.20
(0.315 - 0.008)
Reel Width W
1
14.4
(0.567)
Max.
Quantity per Reel 3,000
.......
.......
....... ..............
....... ..............
P B
F
E
d
T
120 °
D
2
D
D
1
W
1
C
Index Hole
P
0
P
1
W
A
10 pitches (min.)
Direction of Feed
10 pitches (min.)
End
redaeLeciveDreliarT
Start
MM
(INCHES)
DIMENSIONS:
Asia-Pacific: Tel: +886-2 2562-4117 • Fax: +886-2 2562-4116
EMEA: Tel: +36 88 520 390 • Fax: +36 88 520 211
The Americas: Tel: +1-951 781-5500 • Fax: +1-951 781-5700
www.bourns.com

CD143A-SR70

Mfr. #:
Manufacturer:
Bourns
Description:
TVS Diodes / ESD Suppressors SOT 143 37V ESD & Latch up Prot.
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet