OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

HMC435AMS8GETR

P1-P3P4-P6
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
SWITCHES - SPDT - SMT
3
HMC435AMS8G / 435AMS8GE
v00.0213
SPDT NON-REFLECTIVE
SWITCH, DC - 4 GHz
Truth Table
Absolute Maximum Ratings
Control Input Signal Path State
A B RFC to:
Low High RF1
High Low RF2
Control Voltage Range -0.5 to +7.5 Vdc
RF Input Power Vctl = 0/+5V +31 dBm
RF1, RF2 Termination +26 dBm
Junction Temperature 150 °C
Insertion Loss Path - (channel to ground)
Continuous Pdiss (T = 85 °C)
(derate 13 mW/°C above 85 °C)
Thermal Resistance
0.86 W
75 °C/W
Termination Path - (channel to ground)
Continuous Pdiss (T = 85 °C)
(derate 6.5 mW/°C above 85 °C)
Thermal Resistance
0.42 W
153 °C/W
Storage Temperature -65 to +150 °C
Operating Temperature -40 to +85 °C
ESD Sensitivity (HBM) Class 1A
DC blocks are required at ports RFC, RF1, RF2.
Do not operate continuously at RF power input greater than
1 dB compression and do not “
Hot Switch
” power levels
greater than +24 dBm (control = 0/+5 Vdc).
State Bias Condition*
Low 0 Vdc @ 5 µA Typical
High +5.0 Vdc @ 5 µA Typical
Control Voltages
*Control Input Tolerances are ± 0.2 Vdc
ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
Outline Drawing
NOTES:
1. LEADFRAME MATERIAL: COPPER ALLOY
2. DIMENSIONS ARE IN INCHES [MILLIMETERS]
3. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.15mm PER SIDE.
4. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.25mm PER SIDE.
5. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED TO
PCB RF GROUND.
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
SWITCHES - SPDT - SMT
4
HMC435AMS8G / 435AMS8GE
v00.0213
SPDT NON-REFLECTIVE
SWITCH, DC - 4 GHz
Part Number Package Body Material Lead Finish MSL Rating Package Marking
[3]
HMC435AMS8G Low Stress Injection Molded Plastic Sn/Pb Solder
MSL1
[1]
H435A
XXXX
HMC435AMS8GE RoHS-compliant Low Stress Injection Molded Plastic 100% matte Sn
MSL1
[2]
H435A
XXXX
[1] Max peak reow temperature of 235 °C
[2] Max peak reow temperature of 260 °C
[3] 4-Digit lot number XXXX
Package Information
Pin Descriptions
Pin Number Function Description Interface Schematic
1 A See truth and control voltage tables.
2 B See truth and control voltage tables.
3, 5, 8 RFC, RF1, RF2
These pins are DC coupled and matched to 50 Ohms.
Blocking capacitors are required.
4 N/C
This pin is not connected internally; however, all
data shown herein was measured with this pin
connected to RF/DC ground externally.
6, 7 GND
Package bottom has exposed metal paddle that must be
connected to PCB RF ground as well.
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
SWITCHES - SPDT - SMT
5
HMC435AMS8G / 435AMS8GE
v00.0213
SPDT NON-REFLECTIVE
SWITCH, DC - 4 GHz
Evaluation PCB
List of Materials for Evaluation PCB EVAL 105143-HMC435AMS8G
[1]
Item Description
J1 - J3 PCB Mount SMA RF Connector
J4 - J6 DC Pin
C1 - C3 100 pF Capacitor, 0402 Pkg.
R1 - R2 100 Ohm Resistor, 0402 Pkg.
U1 HMC435AMS8G(E) SPDT Switch
PCB
[2]
107821 Evaluation PCB
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Rogers 4350
The circuit board used in the application should
be generated with proper RF circuit design
techniques. Signal lines at the RF port should have
50 Ohm impedance and the package ground leads
and backside ground slug should be connected
directly to the ground plane similar to that shown
above. The evaluation circuit board shown above is
available from Hittite Microwave Corporation upon
request.
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
P1-P3P4-P6

HMC435AMS8GETR

Mfr. #:
Buy HMC435AMS8GETR
Manufacturer:
Analog Devices / Hittite
Description:
RF Switch ICs SPDT hi Isolation Switch SMT, DC - 4 GHz
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet