3
IEC/EN/DIN EN 60747-5-5 Insulation Characteristics*
Description Symbol Characteristic Unit
Installation classication per DIN VDE 0110/1.89, Table 1
for rated mains voltage ≤ 150 V
rms
for rated mains voltage ≤ 300 Vrms
for rated mains voltage ≤ 600 V
rms
I – IV
I – III
I – II
Climatic Classication 55/125/21
Pollution Degree (DIN VDE 0110/1.89) 2
Maximum Working Insulation Voltage V
IORM
567 V
peak
Input to Output Test Voltage, Method b*
V
IORM
x 1.875=V
PR
, 100% Production Test with t
m
=1 sec, Partial discharge < 5 pC
V
PR
1063 V
peak
Input to Output Test Voltage, Method a*
V
IORM
x 1.6=V
PR
, Type and Sample Test, t
m
=10 sec, Partial discharge < 5 pC
V
PR
907 V
peak
Highest Allowable Overvoltage (Transient Overvoltage t
ini
= 60 sec) V
IOTM
6000 V
peak
Safety-limiting values – maximum values allowed in the event of a failure.
Case Temperature
Input Current
Output Power
T
S
I
S, INPUT
P
S, OUTPUT
175
230
600
°C
mA
mW
Insulation Resistance at T
S
, V
IO
= 500 V R
S
>10
9
W
* Refer to the optocoupler section of the Isolation and Control Components Designer’s Catalog, under Product Safety Regulations section, (IEC/
EN/DIN EN 60747-5-5) for a detailed description of Method a and Method b partial discharge test proles.
Regulatory Information
The ACPL-M46U-000E is approved by the following organizations:
UL
Approved under UL 1577, component recognition pro-
gram up to V
ISO
= 3750 V
RMS
CSA
Approved under CSA Component Acceptance Notice #5
IEC/EN/DIN EN 60747-5-5
Approved under:
IEC 60747-5-5:2007
EN 60747-5-5:2011
Recommended Reflow Soldering Profile
Recommended reow soldering condition are per JEDEC Standard J-STD-020 (latest revision). Non-halide ux should
be used.