OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

MKP386M525160YT6

P1-P3P4-P6P7-P9P10-P12P13-P15P16-P18
MKP386M Snubber
www.vishay.com
Vishay Roederstein
Revision: 08-Jun-16
16
Document Number: 28170
For technical questions, contact: dc-film@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
SUB-GROUP C1B PART OF SAMPLE OF SUB-GROUP C1
4.9.3 Final measurements Capacitance |C/C| 2 % of the value measured initially
Tangent of loss angle Increase of tan  0.002
Compared to values measured initially
Insulation resistance 50 % values specified in section “Insulation
Resistance” of this specification
4.15 Solvent resistance of the marking Isopropyl alcohol at room temperature
Method: 1
Rubbing material: Cotton wool
Immersion time: 5 min ± 0.5 min
No visible damage
Legible marking
SUB-GROUP C1 COMBINED SAMPLE OF SPECIMENS OF SUB-GROUPS C1A AND C1B
4.10 Climatic sequence
4.10.2 Dry heat Temperature: + 105 °C
Duration: 16 h
4.10.3 Damp heat cyclic
Test Db, first cycle
4.10.4 Cold Temperature: - 55 °C
Duration: 2 h
4.10.6 Damp heat cyclic
Test Db
remaining cycles
4.10.6.2 Final measurements Voltage proof = U
RDC
for 1 min within
15 min after removal from test chamber
No breakdown or flash-over
Visual examination No visible damage
Legible marking
Capacitance |C/C| 3 % of the value measured initially
Tangent of loss angle Increase of tan  0.002
Compared to values measured in 4.3.1 or
4.6.1 as applicable
Insulation resistance 50 % of values specified in section
“Insulation Resistance” of this specification
SUB-GROUP C2
4.11 Damp heat steady state
4.11.1 Initial measurements Capacitance
Tangent of loss angle at 1 kHz
4.11.3 Final measurements Visual examination
Voltage proof = U
RDC
for 1 min within
15 min after removal from test chamber
No visible damage
Legible marking
No breakdown or flash-over
Capacitance |C/C| 3 % of the value measured in 4.11.1.
Tangent of loss angle Increase of tan  0.002
Compared to values measured in 4.11.1
Insulation resistance 50 % of values specified in section
“Insulation Resistance” of this specification
GROUP C INSPECTION REQUIREMENTS
SUB-CLAUSE NUMBER AND TEST CONDITIONS PERFORMANCE REQUIREMENTS
MKP386M Snubber
www.vishay.com
Vishay Roederstein
Revision: 08-Jun-16
17
Document Number: 28170
For technical questions, contact: dc-film@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
SUB-GROUP C3A
4.12.1 Endurance test
at 50 Hz alternative voltage
Duration: 2000 h
1.25 x U
RAC
at 85 °C
0.875 x U
RAC
at 105 °C
4.12.1.1 Initial measurements Capacitance
Tangent of loss angle at:
For C > 1 µF at 1 kHz
For C 1 µF at 10 kHz
4.12.1.3 Final measurements Visual examination No visible damage
Legible marking
Capacitance |C/C| 5 % compared to values measured
in 4.12.1.1
Tangent of loss angle Increase of tan :
0.0015 for C 1 µF
0.0015 for C > 1 µF
Compared to values measured in 4.12.1.1
Insulation resistance 50 % of values specified in section
“Insulation Resistance” of this specification
SUB-GROUP C4
4.2.6 Temperature characteristics
Initial measurements
Intermediate measurements
Capacitance
Capacitance at - 55 °C
Capacitance at 20 °C
Capacitance at + 105 °C
For - 55 °C to 20 °C
0 % |C/C| 2.75 % or
For 20 °C to 105 °C
- 5.5 % |C/C| 0 %
As specified in section “Capacitance” of this
specification
4.13 Charge and discharge 10 000 cycles
(1...50 c/s) 2.5 x (dU/dt)
R
charge to U
RDC
with maximum pulse slope 0.01 (dU/dt)
R
Duration: 5 ms
Discharge resistance:
4.13.1 Initial measurements Capacitance
Tangent of loss angle at:
For C > 1 µF at 1 kHz
For C 1 µF at 10 kHz
4.13.3 Final measurements Capacitance |C/C| 5 % compared to values measured
in 4.13.1.
Tangent of loss angle Increase of tan :
0.0015 for C 1 µF
0.0015 for C > 1 µF
Compared to values measured in 4.13.1
Insulation resistance 50 % of values specified in section
“Insulation Resistance” of this specification
GROUP C INSPECTION REQUIREMENTS
SUB-CLAUSE NUMBER AND TEST CONDITIONS PERFORMANCE REQUIREMENTS
R
Un V
DC

2.5 x C (dU/dt)
----------------------------------------
=
Legal Disclaimer Notice
www.vishay.com
Vishay
Revision: 08-Feb-17
1
Document Number: 91000
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of
typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding
statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a
particular product with the properties described in the product specification is suitable for use in a particular application.
Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over
time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.
Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for
such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document
or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED
P1-P3P4-P6P7-P9P10-P12P13-P15P16-P18

MKP386M525160YT6

Mfr. #:
Buy MKP386M525160YT6
Manufacturer:
Description:
Film Capacitors MKP 2,5 F 5% 1600Vdc Drawing T6
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet