Derating-Graph
(Ambient Temperature)
Selection Guide
Part Isolation Input Output Output Capacitive
Number Voltage Voltage Voltage Current Efficiency Load
SMD (kVDC) (VDC) (VDC) (mA) (typ.) (max.)
(1)
R1S**-3.305/E* 1 3.3 5 200 81% 2200µF
R1S**-0505/E* 1 5 5 200 81% 2200µF
R1S**-1205/E* 1 12 5 200 82% 2200µF
R1S**-2405/E* 1 24 5 200 80% 2200µF
** without marking denotes 5 pins out of 8 fitted (includes /H option) - e.g. R1S-3.305/EH
** with marking “8“ denotes 8 pins out of 8 fitted (/H option not available) - e.g. R1S8-3.305/E
* add Suffix “/H“ for 2kVDC Isolation Voltage - e.g. R1S-3.305/EH
* add Suffix “/P“ for Continuous Short Protection - e.g. R1S-3.305/EHP, R1S8-3.305/EP
* add Suffix “-R“ for tape & reel packing - e.g. R1S-3.305/EHP-R, R1S8-3.305/E-R
Specifications (measured at T
A
= 25°C, nominal input voltage, full load and after warm-up)
Input Voltage Range ±10%
Output Voltage Accuracy 3.3V, 5V, 12V, 24V ±5% max.
Line Voltage Regulation 3.3V, 5V, 12V, 24V 1.2% max.
(low line to high line at full load)
Load Voltage Regulation Load Deviation 10% to 100% 15% max.
Output Ripple and Noise (20MHz BW) 50mVp-p typ., 100mVp-p max.
Operating Frequency (Vin=nominal input) 20kHz min. / 90kHz max.
Efficiency see Selection Guide
Minimum Load = 0% Specifications valid for 10% minimum load only
Isolation Voltage (tested for 1 second) 1000 VDC
(rated for 1 minute***) 500VAC / 60Hz
H-Suffix (tested for 1 second) 2000 VDC
H-Suffix (rated for 1 minute***) 1000VAC / 60Hz
Isolation Capacitance 75pF max.
Isolation Resistance (Viso=500V) 10GΩ min.
Short-Circuit Protection 1 second
Operating Temperature Range -40°C to +100°C
Storage Temperature -55°C to +125°C
Reflow Temperature RoHS compliant 245°C (30 sec.), Peak 255°C (5sec.) max.
Vapor Phase Process (for more details see Application Notes) 230°C (90 sec.) max.
Relative Humidity 95% RH
Package Weight (R1S8/xx05/E = 1.1g) 1.0g
Packing Quantity 40 pcs per Tube
500 pcs per Reel
MTBF (+25°C) using MIL-HDBK 217F 3459 x 10³ hours
MTBF (+100°C) using MIL-HDBK 217F 756 x 10³ hours
Certifications
UL General Safety Report: E358085 UL60950-1
EN General Safety Report: SPCLVD1112018 EN60950-1 2nd Edition
Note: Detailed Information see Application Notes chapter “MTBF“
1 Watt SMD
Single Output
● Efficiency 82% Full Load
●
1:1 Input Range
● 1kVDC and 2kVDC Isolation Option
● EN pending & UL Certified
●
-40°C to +100°C Operating Temperature Range
● 1W SMD Package
Features
Unregulated
Converters
EN-60950-1 Certified
UL-60950-1 Certified
R1S/E
ECONOLINE
DC/DC-Converter
with 3 year Warranty
Refer to Application Notes
Description
The R1S/E series is an unregulated DC/DC converter in fully encapsulated open Frame
package style. This series has been designed to offer exceptionally high efficiency at low loads
and an extended operating temperature range. Uses include battery powered supplies, green
energy applications and general isolating/converting DC power where board space and high
efficiency is a premium.
RoHS
2011/65/EU
6/6
***Any data referred to in this datasheet are of indicative nature and based on our practical experience only. For further details, please refer
to our Application Notes.
E358085
REV: 2/2015 www.recom-power.comE-28