Pressure Sensors
FS01/FS03 Force Sensors
FS Series
Sensing and Control
FEATURES
• 0 to 1.5 pounds and 0 to
3.0 pound ranges
• High-level output range
• Temperature compensated
• Calibrated zero and span
• Small size
• Low noise
TYPICAL APPLICATIONS
• Medical infusion pumps
• Ambulatory noninvasive
pump pressure
• Occulsion detection
• Kidney dialysis machines
• Load and compression
sensing
• Variable tensions control
WARNING
PERSONAL INJURY
DO NOT USE these
products as safety or
emergency stop devices or
in any other application
where failure of the product
could result in personal
injury.
Failure to comply with
these instructions could
result in death or serious
injury.
The FS01/FS03 sensors are special low cost, peizoresistive-based force
sensors. These high-level voltage output, calibrated, and temperature
compensated sensors give an accurate and stable output over a 5 °C to
50 °C [41 °F to 122 °F] temperature range. They offer simple operation from
a single 5.0 Vdc supply. Operation from any DC supply voltage, up to
12.0 Vdc, is acceptable.
The FS01/FS03 sensors feature an integrated circuit sensor element and
laser trimmed think film ceramic in a small plastic housing. Their extremely
small size enables the use of multiple sensors in limited available space.
This package also provides excellent corrosion resistance and isolation to
external package stress.
WARNING
MISUSE OF DOCUMENTATION
• The information presented in this product sheet is for reference only. Do
not use this document as a product installation guide.
• Complete installation, operation, and maintenance information is provided
in the instructions supplied with each product.
Failure to comply with these instructions could result in death or
serious injury.
