OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

TEN 20-2411WIN

P1-P3P4-P4
http://www.tracopower.com
Features
◆ High power density in 1” x 2”
metal package
◆ Ultra wide 4 : 1 input range
◆ Extended operating temperature range
–40°C to +85°C max.
◆ No minimum load required
◆ I/O isolation 1500 VDC
◆ Remote On/Off
◆ Adjustable output voltage
◆ Industry standard footprint
◆ Shielded metal case with insulated
baseplate
◆ Optional heatsink
◆ Lead free design - RoHS compliant
◆ 3-year product warranty
DC/DC Converters
TEN 20WIN Series, 20 Watt
The TEN 20WIN series is a family of high performance 20W DC/DC converter
modules featuring ultra wide 4:1 input voltage ranges in a ultra compact 2“ x 1“
low profile package with industry-standard footprint. A very high efficiency al-
lows an operating temperature range of –40°C to 85°C. Further standard features
include remote On/Off, output voltage trimming, over voltage protection and short-
circuit protection.
Typical applications for these converters are battery operated equipment and dis-
tributed power architectures in communication and industrial electronics, every-
where where isolated, tightly regulated voltages are required.
Order code Input voltage range Output voltage Output current max. Efficiency typ.
TEN 20-2410WIN
3.3 VDC 5‘500 mA 85 %
TEN 20-2411WIN
5 VDC 4‘000 mA 88 %
TEN 20-2412WIN
12 VDC 1‘670 mA 86 %
TEN 20-2413WIN
9 – 36 VDC
15 VDC 1‘330 mA 86 %
TEN 20-2421WIN
(24 VDC nominal)
±5 VDC ±2‘000 mA 88 %
TEN 20-2422WIN
±12 VDC ±835 mA 87 %
TEN 20-2423WIN
±15 VDC ±665 mA 87 %
TEN 20-4810WIN
3.3 VDC 5‘500 mA 85 %
TEN 20-4811WIN
5 VDC 4‘000 mA 88 %
TEN 20-4812WIN
12 VDC 1‘670 mA 87 %
TEN 20-4813WIN
18 – 75 VDC
15 VDC 1‘330 mA 87 %
TEN 20-4821WIN
(48 VDC nominal)
±5 VDC ±2‘000 mA 89 %
TEN 20-4822WIN
±12 VDC ±835 mA 88 %
TEN 20-4823WIN
±15 VDC ±665 mA 88 %
Models
Page 1 of 4
UL 60950 -1
http://www.tracopower.com
Input Specifications
Input current at no load 24 Vin models: 50 mA typ.
48 Vin models: 35 mA typ.
Input current at full load 24 Vin models: 1000 mA typ.
48 Vin models: 500 mA typ.
Surge voltage 24 Vin models: 50 V max.
(100 msec. max.) 48 Vin models: 100 V max.
Input voltage variation (dv/dt) 5 V / ms, max.
(complies to ETS 300 132 part. 4.4)
Start-up voltage / under voltage lockout 24 Vin models: 9 VDC / 7.5 VDC typ.
48 Vin models: 18 VDC / 15 VDC typ.
Conducted noise (input) EN 55022 level A, FCC part 15, level A with
external capacitor (see application note)
ESD (input) EN 61000-4-2, perf. criteria B
Fast transient (input) EN 61000-4-4, perf. criteria B
Surge (input) EN 61000-4-5, perf. criteria A
Output Specifications
Voltage set accuracy ±1 %
Output voltage adjustment (single output models only) ±10 % by external resistor, see application note:
Regulation – Input variation Vin min. to Vin max. 0.2 % max.
– Load variation 0 – 100%:
single output models: 0.5 % max.
dual output models: 1 % max. (balanced load)
– Load cross variation 25 % / 100 % 5 % max.
Temperature coefficient 0.02 %/K
Ripple and noise (20 MHz Bandwidth) single output models: 75 mVpk-pk max.
dual output models: 100 mVpk-pk max.
Start up time (nominal Vin and constant resistive load) 20 ms typ.
Transient Response (25% load step change) 250 µs typ.
Short circuit protection indefinite (automatic recovery)
Over load protection 150 % of Iout max typ.
Over voltage protection 3.3 Vout models: 3.9 V
5 /±5 Vout models: 6.2 / ±6.2 V
12 /±12 Vout models: 15 / ±15 V
15 /±15 Vout models: 18 / ±18 V
Capacitive load 3.3 Vout models: 18’000 µF max.
5 Vout models / ±5 Vout models: 9’600 µF max. / ±4’800 µF max.
12 Vout models / ±12 Vout models: 1’600 µF max. / ±800 µF max.
15 Vout models / ±15 Vout models: 1’000 µF max. / ±500 µF max.
General Specifications
Temperature ranges – Operating –40°C to +85°C (see power derating)
– Case temperature +105°C max.
– Storage –55°C to +125°C
Humidity (non condensing) 95 % rel H max.
DC/DC Converters
TEN 20WIN 20 Watt
All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated.
Page 2 of 4
http://www.tracopower.com
DC/DC Converters
TEN 20WIN 20 Watt
General Specifications
Reliability, calculated MTBF (MIL-HDBK-217F at +25°C, ground benign) >1.8 Mio. h
Isolation voltage (60 sec.) – Input/Output 1‘500 VDC
Isolation capacitance – Input/Output 1500 pF max
Isolation resistance – Input/Output >1‘000 M Ohm
Switching frequency (fixed) 400 kHz typ. (pulse width modulation PWM)
Vibration 20–2000Hz, 7.6grms, 3 axes (total 3 hours)
Remote On/Off – On: 3.0 to 12 VDC or open circuit.
– Off: 0 to 1.2 VDC or short circuit pin 2 and pin 6
– Off idle current: 2.5 mA typ.
Safety standards UL 60950-1, EN/IEC 60950-1
Safety approvals – UL/cUL www.ul.com -> certifications -> File e188913
Environmental compliance – Reach www.tracopower.com/info/reach-declaration.pdf
– RoHS RoHS directive 2011/65/EU
Physical Specifications
Casing material copper, nickel plated
Baseplate material non conductive FR4
Potting material epoxy (UL 94V-0 - rated)
Weight 27 g (0.95 oz)
Soldering temperature max. 265°C / 10 sec.
Power Derating
Page 3 of 4
-40 -20 0 20 40 60 80 100
100
80
60
40
20
0
Output Power (%)
Ambient Temperature [°C]
105
Natural convection with heatsink
Natural convection without heatsink
All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated.
Supporting documents: www.tracopower.com/overview/ten20win
P1-P3P4-P4

TEN 20-2411WIN

Mfr. #:
Buy TEN 20-2411WIN
Manufacturer:
TRACO Power
Description:
Isolated DC/DC Converters
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet