8
LTC1350
1350fa
LINEAR TECHNOLOGY CORPORATION 1993
LW/TP 0103 1K REV A • PRINTED IN USA
PART NUMBER DESCRIPTION COMMENTS
LT
®
1137A 5V, 3 Driver, 5 Receiver RS232 Transceiver ±15kV ESD per IEC 1000-4
LTC1327 3.3V, 3 Driver, 5 Receiver RS562 Transceiver 300µA Supply Current, 0.2µA in Shutdown
LTC1337 5V, 3 Driver, 5 Receiver RS232 Transceiver 300µA Supply Current, 1µA in Shutdown
LTC1348 3.3V to 5V, 3 Driver, 5 Receiver RS232 Transceiver True RS232 on 3.3V, 5 Receivers Active in Shutdown
LTC1385 3.3V, 2 Driver, 2 Receiver RS562 Transceiver 200µA Supply Current, 2 Receivers Active in Shutdown
LTC1386 3.3V, 2 Driver, 2 Receiver RS562 Transceiver 200µA Supply Current, Narrow 16-Pin SO
LTC2844 3.3V, Software-Selectable Multiprotocol Transceiver 4 Drivers, 4 Receivers for Control Signals Including LL
LTC2845 3.3V, Software-Selectable Multiprotocol Transceiver 5 Drivers, 5 Receivers for Control Signals Including LL, RL and TM
LTC2846 3.3V, Software-Selectable Multiprotocol Transceiver 4 Drivers, 4 Receivers with Termination for Data/Clock
Linear Technology Corporation
1630 McCarthy Blvd., Milpitas, CA 95035-7487
(408) 432-1900
●
FAX
: (408) 434-0507
●
WWW
.linear.com
U
PACKAGE DESCRIPTIO
S28 (WIDE) 0502
0° – 8° TYP
NOTE 3
.009 – .013
(0.229 – 0.330)
.016 – .050
(0.406 – 1.270)
.291 – .299
(7.391 – 7.595)
NOTE 4
× 45°
.010 – .029
(0.254 – 0.737)
.037 – .045
(0.940 – 1.143)
.004 – .012
(0.102 – 0.305)
.093 – .104
(2.362 – 2.642)
.050
(1.270)
BSC
.014 – .019
(0.356 – 0.482)
TYP
NOTE 3
.697 – .712
(17.70 – 18.08)
NOTE 4
1
23
4
5
6
78
.394 – .419
(10.007 – 10.643)
910
2526
11 12
22 21 20 19 18
17
16 152324
14
N/2
13
2728
N
.420
MIN
.325 ±.005
RECOMMENDED SOLDER PAD LAYOUT
.045 ±.005
N
123 N/2
.050 BSC
.030 ±.005
TYP
.005
(0.127)
RAD MIN
INCHES
(MILLIMETERS)
NOTE:
1. DIMENSIONS IN
2. DRAWING NOT TO SCALE
3. PIN 1 IDENT, NOTCH ON TOP AND CAVITIES ON THE BOTTOM OF PACKAGES ARE THE MANUFACTURING OPTIONS.
THE PART MAY BE SUPPLIED WITH OR WITHOUT ANY OF THE OPTIONS
4. THESE DIMENSIONS DO NOT INCLUDE MOLD FLASH OR PROTRUSIONS.
MOLD FLASH OR PROTRUSIONS SHALL NOT EXCEED .006" (0.15mm)
RELATED PARTS
SW Package
28-Lead Plastic Small Outline (Wide .300 Inch)
(Reference LTC DWG # 05-08-1620)