74AUP1Z125 All information provided in this document is subject to legal disclaimers. © NXP B.V. 2012. All rights reserved.
Product data sheet Rev. 5 — 8 August 2012 9 of 32
NXP Semiconductors
74AUP1Z125
Low-power X-tal driver with enable and internal resistor; 3-state
I
I
input leakage current X1 input
V
I
= EN = V
CC
; V
CC
=0Vto3.6V - - 0.5 A
EN
input
V
I
= GND to 3.6 V;
V
CC
=0Vto3.6V
--0.5 A
I
pu
pull-up current X1 input; EN = V
CC
V
I
= GND; V
CC
= 0.8 V to 3.6 V - - 15 A
I
OZ
OFF-state output current Y output; V
O
= 0 V to 3.6 V; V
CC
= 0
V to 3.6 V; EN = V
CC
--0.5 A
I
OFF
power-off leakage current V
I
or V
O
= 0 V to 3.6 V; V
CC
= 0 V
[1]
--0.5 A
I
OFF
additional power-off
leakage current
V
I
or V
O
= 0 V to 3.6 V;
V
CC
=0Vto0.2V
[1]
--0.6 A
I
CC
supply current V
I
= GND or V
CC
; I
O
= 0 A;
V
CC
= 0.8 V to 3.6 V
--75A
I
CC
additional supply current EN input
V
I
= V
CC
0.6 V; I
O
= 0 A;
V
CC
=3.3V
--50A
g
fs
forward transconductance see Figure 10 and Figure 11
V
CC
= 0.8 V - - - mA/V
V
CC
= 1.1 V to 1.3 V - - 10.8 mA/V
V
CC
= 1.4 V to 1.6 V 1.8 - 21.2 mA/V
V
CC
= 1.65 V to 1.95 V 7.5 - 29.9 mA/V
V
CC
= 2.3 V to 2.7 V 15.0 - 38.0 mA/V
V
CC
= 3.0 V to 3.6 V 17.8 - 39.2 mA/V
R
bias
bias resistance EN =GND; f
i
= 0 Hz; V
I
= 0 V or
V
CC
; See Figure 5; for frequency
behavior see Figure 6
1.07 - 3.11 M
Table 7. Static characteristics …continued
At recommended operating conditions; voltages are referenced to GND (ground = 0 V).
Symbol Parameter Conditions Min Typ Max Unit
