OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

ISL89400AR3Z-T

P1-P3P4-P6P7-P9P10-P12
ISL89400, ISL89401
10
FN6614.3
December 4, 2015
Submit Document Feedback
About Intersil
Intersil Corporation is a leading provider of innovative power management and precision analog solutions. The company's products
address some of the largest markets within the industrial and infrastructure, mobile computing and high-end consumer markets.
For the most updated datasheet, application notes, related documentation and related parts, please see the respective product
information page found at www.intersil.com.
You may report errors or suggestions for improving this datasheet by visiting www.intersil.com/ask
.
Reliability reports are also available from our website at www.intersil.com/support
.
FIGURE 23. BOOTSTRAP DIODE I-V CHARACTERISTICS FIGURE 24. V
HS
VOLTAGE vs V
DD
VOLTAGE
Revision History
The revision history provided is for informational purposes only and is believed to be accurate, but not warranted. Please go to the web to make sure that
you have the latest revision.
DATE REVISION CHANGE
December 4, 2015 FN6614.3 Updated datasheet to the latest Intersil standards.
Moved Note 5 from “Absolute Maximum Ratings” section to “Maximum Recommended Operating
Conditions”section.
Updated Theta JC on page 5 for DFN from “7.5” to “3.5”.
Added Theta JC on page 5 for SOIC.
Updated Theta JA on page 5 for SOIC from “115” to “107”.
Added Note 10 on page 5.
Updated last sentence in the “Electrical Specifications” table title area.
Added more verbiage to “Switching Specifications” table title area.
Added Revision History and About Intersil sections
Updated package outline drawings to the latest revisions. Changes are as follows:
M8.15
-Updated to new POD format by removing table and moving dimensions onto drawing and adding land
pattern
-Changed in Typical Recommended Land Pattern the following:
2.41(0.095) to 2.20(0.087)
0.76 (0.030) to 0.60(0.023)
0.200 to 5.20(0.205)
-Changed Note 1 “1982” to “1994”
L9.3x3
-Tiebar Note 9 added: Tiebar shown (if present) is a non-functional feature and may be located on any of the
4 sides (or ends).
Typical Performance Curves (Continued)
0.3 0.4 0.5 0.6 0.7 0.8
1
.
10
-3
0.01
0.10
1.00
FORWARD VOLTAGE (V)
FORWARD CURRENT (A)
1
.
10
-4
1
.
10
-5
1
.
10
-6
12 13 14 15 16
0
20
40
60
80
100
120
V
HS
TO V
SS
VOLTAGE (V)
V
D
D
t
o
V
S
S
V
O
L
T
A
G
E
(
V
)
ISL89400, ISL89401
11
FN6614.3
December 4, 2015
Submit Document Feedback
Package Outline Drawing
M8.15
8 LEAD NARROW BODY SMALL OUTLINE PLASTIC PACKAGE
Rev 4, 1/12
DETAIL "A"
TOP VIEW
INDEX
AREA
123
-C-
SEATING PLANE
x 45°
NOTES:
1. Dimensioning and tolerancing per ANSI Y14.5M-1994.
2. Package length does not include mold flash, protrusions or gate burrs.
Mold flash, protrusion and gate burrs shall not exceed 0.15mm (0.006
inch) per side.
3. Package width does not include interlead flash or protrusions. Interlead
flash and protrusions shall not exceed 0.25mm (0.010 inch) per side.
4. The chamfer on the body is optional. If it is not present, a visual index
feature must be located within the crosshatched area.
5. Terminal numbers are shown for reference only.
6. The lead width as measured 0.36mm (0.014 inch) or greater above the
seating plane, shall not exceed a maximum value of 0.61mm (0.024 inch).
7. Controlling dimension: MILLIMETER. Converted inch dimensions are not
necessarily exact.
8. This outline conforms to JEDEC publication MS-012-AA ISSUE C.
SIDE VIEW “A
SIDE VIEW “B”
1.27 (0.050)
6.20 (0.244)
5.80 (0.228)
4.00 (0.157)
3.80 (0.150)
0.50 (0.20)
0.25 (0.01)
5.00 (0.197)
4.80 (0.189)
1.75 (0.069)
1.35 (0.053)
0.25(0.010)
0.10(0.004)
0.51(0.020)
0.33(0.013)
8°
0°
0.25 (0.010)
0.19 (0.008)
1.27 (0.050)
0.40 (0.016)
1.27 (0.050)
5.20(0.205)
1
2
3
4
5
6
7
8
TYPICAL RECOMMENDED LAND PATTERN
2.20 (0.087)
0.60 (0.023)
ISL89400, ISL89401
12
Intersil products are manufactured, assembled and tested utilizing ISO9001 quality systems as noted
in the quality certifications found at www.intersil.com/en/support/qualandreliability.html
Intersil products are sold by description only. Intersil Corporation reserves the right to make changes in circuit design, software and/or specifications at any time
without notice. Accordingly, the reader is cautioned to verify that data sheets are current before placing orders. Information furnished by Intersil is believed to be
accurate and reliable. However, no responsibility is assumed by Intersil or its subsidiaries for its use; nor for any infringements of patents or other rights of third
parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of Intersil or its subsidiaries.
For information regarding Intersil Corporation and its products, see www.intersil.com
FN6614.3
December 4, 2015
For additional products, see www.intersil.com/en/products.html
Submit Document Feedback
Dual Flat No-Lead Plastic Package (DFN)
//
NX (b)
SECTION "C-C"
FOR ODD TERMINAL/SIDE
e
CC
4
C
L
TERMINAL TIP
(A1)
BOTTOM VIEW
A
5
AREA
INDEX
C
C
0.10
0.08
SIDE VIEW
0.15
2X
E
A
B
C0.15
D
TOP
VIEW
CB
2X
5
7
AREA
INDEX
NX L
E2
E2/2
REF.
e
N
(Nd-1)Xe
(DATUM A)
(DATUM B)
4
0.10
76
D2
BAC
N-1
12
PLANE
SEATING
C
A
A3
NX b
D2/2
NX k
8
L
M
L9.3x3
9 LEAD DUAL FLAT NO-LEAD PLASTIC PACKAGE
SYMBOL
MILLIMETERS
NOTESMIN NOMINAL MAX
A 0.80 0.90 1.00 -
A1 - - 0.05 -
A3 0.20 REF -
b 0.20 0.25 0.30 4, 7
D 3.00 BSC -
D2 1.85 2.00 2.10 6, 7
E 3.00 BSC -
E2 0.80 0.95 1.05 6, 7
e 0.50 BSC -
k0.60 - - -
L 0.25 0.35 0.45 7
N92
Rev. 1 3/15
NOTES:
1. Dimensioning and tolerancing conform to ASME Y14.5-1994.
2. N is the number of terminals.
3. All dimensions are in millimeters. Angles are in degrees.
4. Dimension b applies to the metallized terminal and is measured
between 0.15mm and 0.30mm from the terminal tip.
5. The configuration of the pin #1 identifier is optional, but must be
located within the zone indicated. The pin #1 identifier may be
either a mold or mark feature.
6. Dimensions D2 and E2 are for the exposed pads which provide
improved electrical and thermal performance.
7. Nominal dimensions are provided to assist with PCB Land
Pattern Design efforts, see Intersil Technical Brief TB389.
8. Compliant to JEDEC MO-229-WEED-3 except for dimensions E2
& D2.
9. Tiebar shown (if present) is a non-functional feature and may be
located on any of the 4 sides (or ends).
P1-P3P4-P6P7-P9P10-P12

ISL89400AR3Z-T

Mfr. #:
Buy ISL89400AR3Z-T
Manufacturer:
Renesas / Intersil
Description:
Gate Drivers 1 25A 100V BRDG DRVR 3X3
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet