C8051F326-GDI

Rev. 1.0 7
C8051F326-GDI
Table 3.2. Wafer and Die Information
Wafer ID
C8051F326
Wafer Dimensions
8 in
Die Dimensions
2.43 mm x 2.45 mm
Wafer Thickness
12 mil ±1 mil
Wafer Identification
Notch
Scribe Line Width
80 µm
Die Per Wafer*
Contact Sales for info
Passivation
Standard
Wafer Packaging Detail
Wafer Jar
Bond Pad Dimensions
60 µm x 60 µm
Maximum Processing Temperature
250 °C
Electronic Die Map Format
.txt
Bond Pad Pitch Minimum
75 µm
*Note: This is the Expected Known Good Die yielded per wafer and
represents the batch order quantity (one wafer).
C8051F326-GDI
8 Rev. 1.0
4. Wafer Storage Guidelines
It is necessary to conform to appropriate wafer storage practices to avoid product degradation or contami-
nation.
Wafers may be stored for up to 18 months in the original packaging supplied by Silicon Labs.
Wafers must be stored at a temperature of 18–24 °C.
Wafers must be stored in a humidity-controlled environment with a relative humidity of <30%.
Wafers should be stored in a clean, dry, inert atmosphere (e.g. nitrogen or clean, dry air).
Disclaimer
Silicon Laboratories intends to provide customers with the latest, accurate, and in-depth documentation of all peripherals and modules available for system and software implementers
using or intending to use the Silicon Laboratories products. Characterization data, available modules and peripherals, memory sizes and memory addresses refer to each specific
device, and "Typical" parameters provided can and do vary in different applications. Application examples described herein are for illustrative purposes only. Silicon Laboratories
reserves the right to make changes without further notice and limitation to product information, specifications, and descriptions herein, and does not give warranties as to the accuracy
or completeness of the included information. Silicon Laboratories shall have no liability for the consequences of use of the information supplied herein. This document does not imply
or express copyright licenses granted hereunder to design or fabricate any integrated circuits. The products must not be used within any Life Support System without the specific
written consent of Silicon Laboratories. A "Life Support System" is any product or system intended to support or sustain life and/or health, which, if it fails, can be reasonably expected
to result in significant personal injury or death. Silicon Laboratories products are generally not intended for military applications. Silicon Laboratories products shall under no
circumstances be used in weapons of mass destruction including (but not limited to) nuclear, biological or chemical weapons, or missiles capable of delivering such weapons.
Trademark Information
Silicon Laboratories Inc., Silicon Laboratories, Silicon Labs, SiLabs and the Silicon Labs logo, CMEMS®, EFM, EFM32, EFR, Energy Micro, Energy Micro logo and combinations
thereof, "the world’s most energy friendly microcontrollers", Ember®, EZLink®, EZMac®, EZRadio®, EZRadioPRO®, DSPLL®, ISOmodem ®, Precision32®, ProSLIC®, SiPHY®,
USBXpress® and others are trademarks or registered trademarks of Silicon Laboratories Inc. ARM, CORTEX, Cortex-M3 and THUMB are trademarks or registered trademarks of
ARM Holdings. Keil is a registered trademark of ARM Limited. All other products or brand names mentioned herein are trademarks of their respective holders.
http://www.silabs.com
Silicon Laboratories Inc.
400 West Cesar Chavez
Austin, TX 78701
USA
Simplicity Studio
One-click access to MCU and
wireless tools, documentation,
software, source code libraries &
more. Available for Windows,
Mac and Linux!
IoT Portfolio
www.silabs.com/IoT
SW/HW
www.silabs.com/simplicity
Quality
www.silabs.com/quality
Support and Community
community.silabs.com

C8051F326-GDI

Mfr. #:
Manufacturer:
Silicon Labs
Description:
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet