OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

4006-020

P1-P3
Preliminary
20mA, 25mA, or 30mA, constant current output*
Extremely small form factor* (0.25” diameter x 0.5” long)
Output open circuit protection
Pulse and strobe capable
Solar & Landscape Lighting
Architectural Lighting
Track Lighting
Automotive & Marine Lighting
Portable Lighting & Flashlights
Point of Purchase Lighting
Desk & Reading Lamps
Signal & marker Lighting
Flashing & Strobe Lighting
Cabinet & Display Case Lighting
Sign Lighting
Flashlights
The 4006 DynaOhm™ by LUXdrive is a semiconductor
based resistor that provides constant current to LEDs
and strings of LEDs. It also reduces current to the LED(s)
when the device temperature rises. It is the perfect
replacement for a xed reisistor in circuits where the
input voltage varies. The simple two wire DynaOhm
™
eliminates complicated math from low power LED
circuits. The DynaOhm™ can drop up to 24V (25mA
model) allowing for use with 24VDC automotive
systems and one LED.
©2011 LUXdrive, A Division of LEDdynamics, Inc. www.LUXdrive.com.
Specications subject to change without notice. April, 2011 - Rev 1.0
M
a
d
e
i
n
t
h
e
U
S
A
LEDdynamics, Inc.
802.728.4533 P
802.728.3800 F
sales@LUXdrive.com
www.LUXdrive.com
Two Wire Power Module
4006 DynaOhm
TM
DATA SHEET Page 1 of 3
Product Overview
Features
Typical Applications
RoHS
Compliant
2002/95/EC
Pb
c
tor
Ds
E
D(s)
t
e
m
™
A
Preliminary
©2011 LUXdrive, A Division of LEDdynamics, Inc. www.LUXdrive.com.
Specications subject to change without notice. April, 2011 - Rev 1.0
M
a
d
e
i
n
t
h
e
U
S
A
LEDdynamics, Inc.
802.728.4533 P
802.728.3800 F
sales@LUXdrive.com
www.LUXdrive.com
* Output current rating in milliamperes (mA): 20, 25, 30 or special order factory custom rating
24V
20V
30V
Part Number
4006-025
4006-030
4006-020
Drive
Current
20mA
25mA
30mA
Connection
Type
2 Wires
2 Wires
2 Wires
Table 1
Product Selection
Part Number Identication Table
Absolute Maximum Ratings
Typical Characteristics
Input Voltage (transient) .......................................... .50V
DC
Output Voltage..................................................V
IN
- 2.6V
DC
Reverse Voltage . . . ....................................... ........-1V
DC
Power Dissipation . . . ....................................... ......0.6W
Output tolerance (within specied temp. range)..........................±10%
Min input voltage for current regulation ................................2.6V
DC
+
Vf
LED
Min input voltage for device to conduct ................................0.6V
DC
Output current, 4006-020 ..........................................20mA
1
Output current, 4006-025 ..........................................25mA
1
Output current, 4006-030 . .........................................30mA
1
Maximum Operating temperature (Tcase)...............................-40-+100°C
Storage temperature..............................................-40-+135°C
Specications
1 - Measured with single emitter; output current drops slightly with additional series junctions to limit maximum power dissipation.
Two Wire Power Module
4006 DynaOhm
TM
DATA SHEET Page 2 of 3
Maximum
Voltage Drop
Preliminary
©2011 LUXdrive, A Division of LEDdynamics, Inc. www.LUXdrive.com.
Specications subject to change without notice. April, 2011 - Rev 1.0
M
a
d
e
i
n
t
h
e
U
S
A
LEDdynamics, Inc.
802.728.4533 P
802.728.3800 F
sales@LUXdrive.com
www.LUXdrive.com
Physical Dimensions
Figure 1.
25mA unit driving 1 5mm LED
(VIN > 5VDC)
Figure 2.
25mA unit driving 3 5mm LED
(VIN > 12VDC)
Two Wire Power Module
4006 DynaOhm
TM
DATA SHEET Page 3 of 3
Application Figures
4006
+
+6VDC
4006
+
12.6mm
0.5”
6.3mm
0.25”
- Lead
14mm
0.55”
+ Lead
22mm
0.875”
Figure 3
Top View - Typical Physical Dimensions
Figure 4
Side View
P1-P3

4006-020

Mfr. #:
Buy 4006-020
Manufacturer:
Description:
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet