OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

ISL9005IRBZ-T

P1-P3P4-P6P7-P9
1
FN9234.2
ISL9005
LDO with Low I
SUPPLY
, High PSRR
ISL9005 is a high performance Low Dropout linear regulator
capable of sourcing 300mA current. It has a low standby
current and high-PSRR and is stable with output capacitance
of 1µF to 10µF with ESR of up to 200m.
The ISL9005 has a high PSRR of 75dB and output noise
less than 45µV
RMS
. When coupled with a no load quiescent
current of 50µA (typical), and 0.1µA shutdown current, the
ISL9005 is an ideal choice for portable wireless equipment.
Several different fixed voltage outputs are standard. Output
voltage options for each LDO range are from 1.5V to 3.3V.
Other output voltage options may be available upon request.
Pinout
ISL9005
(8 LD 2x3 DFN)
TOP VIEW
Features
• 300mA high performance LDO
• Excellent transient response to large current steps
• Excellent load regulation: <0.1% voltage change across
full range of load current
• High PSRR: 75dB @ 1kHz
• Wide input voltage capability: 2.3V to 6.5V
• Very low quiescent current: 50µA
• Low dropout voltage: typically 200mV @ 300mA
• Low output noise: typically 45µV
RMS
@ 100µA (1.5V)
• Stable with 1µF to 10µF ceramic capacitors
• Soft-start to limit input current surge during enable
• Current limit and overheat protection
• ±1.8% accuracy over all operating conditions
• Tiny 2mmx3mm 8 Ld DFN package
• -40°C to +85°C operating temperature range
• Pb-free (RoHS compliant)
Applications
• PDAs, cell phones and smart phones
• Portable instruments, MP3 players
• Handheld devices including medical handhelds
VIN
EN
NC
NC
VO
NC
NC
GND
2
3
4
1
7
6
5
8
Ordering Information
PART NUMBER
(Notes 1, 2) PART MARKING
VO VOLTAGE
(V) (Note 3) TEMP RANGE (°C)
PACKAGE
Tape and Reel
(Pb-Free) PKG. DWG. #
ISL9005IRNZ-T ETA 3.3V -40 to +85 8 Ld 2x3 DFN L8.2x3
ISL9005IRMZ-T ESA 3.0V -40 to +85 8 Ld 2x3 DFN L8.2x3
ISL9005IRLZ-T ERA 2.9V -40 to +85 8 Ld 2x3 DFN L8.2x3
ISL9005IRKZ-T EPA 2.85V -40 to +85 8 Ld 2x3 DFN L8.2x3
ISL9005IRJZ-T ENA 2.8V -40 to +85 8 Ld 2x3 DFN L8.2x3
ISL9005IRRZ-T EVA 2.6V -40 to +85 8 Ld 2x3 DFN L8.2x3
ISL9005IRFZ-T EMA 2.5V -40 to +85 8 Ld 2x3 DFN L8.2x3
ISL9005IRCZ-T ELA 1.8V -40 to +85 8 Ld 2x3 DFN L8.2x3
ISL9005IRBZ-T EKA 1.5V -40 to +85 8 Ld 2x3 DFN L8.2x3
NOTES:
1. These Intersil Pb-free plastic packaged products employ special Pb-free material sets; molding compounds/die attach materials and 100% matte
tin plate PLUS ANNEAL - e3 termination finish, which is RoHS compliant and compatible with both SnPb and Pb-free soldering operations.
Intersil Pb-free products are MSL classified at Pb-free peak reflow temperatures that meet or exceed the Pb-free requirements of IPC/JEDEC
J STD-020.
2. Please refer to TB347 for details on reel specifications.
3. For other output voltages, contact Intersil Marketing.
Datasheet May 5, 2008
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 1-888-468-3774
| Intersil (and design) is a registered trademark of Intersil Americas Inc.
Copyright Intersil Americas Inc. 2005, 2007, 2008. All Rights Reserved
All other trademarks mentioned are the property of their respective owners.
N
O
T
R
E
C
O
M
M
E
N
D
E
D
F
O
R
N
E
W
D
E
S
I
G
N
S
R
E
C
O
M
M
E
N
D
E
D
R
E
P
L
A
C
E
M
E
N
T
P
A
R
T
I
S
L
9
0
0
5
A
2
FN9234.2
May 5, 2008
Absolute Maximum Ratings Thermal Information
Supply Voltage (VIN) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . +7.1V
VO Pin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . +3.6V
All Other Pins . . . . . . . . . . . . . . . . . . . . . . . . . . -0.3 to (VIN + 0.3)V
Recommended Operating Conditions
Ambient Temperature Range (T
A
) . . . . . . . . . . . . . . .-40°C to +85°C
Supply Voltage (VIN) . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.3V to 6.5V
Thermal Resistance (Notes 4, 5)
JA
(°C/W)
JC
(°C/W)
8 Ld 2x3 DFN Package . . . . . . . . . . . . 69 10
Junction Temperature Range . . . . . . . . . . . . . . . . .-40°C to +125°C
Operating Temperature Range . . . . . . . . . . . . . . . . .-40°C to +85°C
Storage Temperature Range . . . . . . . . . . . . . . . . . .-65°C to +150°C
Pb-free reflow profile . . . . . . . . . . . . . . . . . . . . . . . . . .see link below
http://www.intersil.com/pbfree/Pb-FreeReflow.asp
CAUTION: Do not operate at or near the maximum ratings listed for extended periods of time. Exposure to such conditions may adversely impact product reliability and
result in failures not covered by warranty.
NOTES:
4.
JA
is measured in free air with the component mounted on a high effective thermal conductivity test board with “direct attach” features. See
Tech Brief TB379.
5. For
JC
, the “case temp” location is the center of the exposed metal pad on the package underside.
Electrical Specifications Unless otherwise noted, all parameters are guaranteed over the operational supply voltage and temperature
range of the device as follows: T
A
= -40°C to +85°C; V
IN
= (V
O
+ 0.5V) to 5.5V with a minimum V
IN
of 2.3V;
C
IN
= 1µF; C
O
= 1µF.
PARAMETER SYMBOL TEST CONDITIONS
MIN
(Note 8) TYP
MAX
(Note 8) UNITS
DC CHARACTERISTICS
Supply Voltage V
IN
2.3 6.5 V
Ground Current Quiescent condition: I
O
= 0µA
I
DD
LDO active 50 75 µA
Shutdown Current I
DDS
LDO disabled @ +25°C 0.1 1.0 µA
UVLO Threshold V
UV+
1.9 2.1 2.3 V
V
UV-
1.6 1.8 2.0 V
Regulation Voltage Accuracy Initial accuracy at V
IN
= V
O
+ 0.5V, I
O
= 10mA, T
J
= +25°C -0.7 +0.7 %
V
IN
= V
O
+ 0.5V to 5.5V, I
O
= 10µA to 300mA, T
J
= +25°C -0.8 +0.8 %
V
IN
= V
O
+ 0.5V to 5.5V, I
O
= 10µA to 300mA, T
J
= -40°C to
+125°C
-1.8 +1.8 %
Maximum Output Current I
MAX
Continuous 300 mA
Internal Current Limit I
LIM
350 475 600 mA
Dropout Voltage (Note 7) V
DO1
I
O
= 300mA; V
O
2.5V 300 500 mV
V
DO2
I
O
= 300mA; 2.5V V
O
2.8V 250 400 mV
V
DO3
I
O
= 300mA; V
O
> 2.8V 200 325 mV
Thermal Shutdown Temperature T
SD+
145 °C
T
SD-
110 °C
AC CHARACTERISTICS
Ripple Rejection (Note 6) I
O
= 10mA, V
IN
= 2.8V (min), V
O
= 1.8V
@ 1kHz 75 dB
@ 10kHz 60 dB
@ 100kHz 40 dB
Output Noise Voltage (Note 6) I
O
= 100µA, V
O
= 1.5V, T
A
= +25°C
BW = 10Hz to 100kHz
45 µV
RMS
ISL9005
3
FN9234.2
May 5, 2008
DEVICE START-UP CHARACTERISTICS
Device Enable Time t
EN
Time from assertion of the ENx pin to when the output voltage
reaches 95% of the VO (nom)
250 500 µs
LDO Soft-start Ramp Rate t
SSR
Slope of linear portion of LDO output voltage ramp during
start-up
30 60 µs/V
EN PIN CHARACTERISTICS
Input Low Voltage V
IL
-0.3 0.5 V
Input High Voltage V
IH
1.4 V
IN
+ 0.3 V
Input Leakage Current I
IL
, I
IH
0.1 µA
Pin Capacitance C
PIN
Informative 5 pF
NOTES:
6. Limits established by characterization and are not production tested.
7. VOx = 0.98*VOx(NOM); Valid for VOx greater than 1.85V.
8. Parts are 100% tested at +25°C. Temperature limits established by characterization and are not production tested.
Electrical Specifications Unless otherwise noted, all parameters are guaranteed over the operational supply voltage and temperature
range of the device as follows: T
A
= -40°C to +85°C; V
IN
= (V
O
+ 0.5V) to 5.5V with a minimum V
IN
of 2.3V;
C
IN
= 1µF; C
O
= 1µF. (Continued)
PARAMETER SYMBOL TEST CONDITIONS
MIN
(Note 8) TYP
MAX
(Note 8) UNITS
ISL9005
P1-P3P4-P6P7-P9

ISL9005IRBZ-T

Mfr. #:
Buy ISL9005IRBZ-T
Manufacturer:
Renesas / Intersil
Description:
LDO Voltage Regulators W/ANNEAL SINGLELDO LW IQ HI PSRR 1 5V
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet