NJM555D

NJM555
-
1
-
Ver.2012-11-27
TIMER
GENERAL DESCRIPTION PACKAGE OUTLINE
The NJM555 monolithic timing circuit is a highly stable controller
capable of producing accruate time delays or oscillation. In the time
delay mode, delay time is precisely controlled by only two external
parts : a resistor and a capacitor. For operation as an oscillator, both
the free running frequency and the duty cycle are accurately controlled
by two external resistors and a capacitor.
Terminals are provided for triggering and resetting. The circuit will
trigger and reset on falling waveforms. The output can source or sink
up to 200mA or drive TTL circuits.
FEATURES
Operating Voltage (4.5V to 16V)
Less Number of External Components
Package Outline DIP8, DMP8, SSOP8, SIP8
Bipolar Technology
PIN CONFIGURATION
EQUIVALENT CIRCUIT
NJM555D
NJM555L
NJM555M
NJM555V
NJM555D
NJM555M
NJM555V
NJM555L
NJM555
-
2
-
Ver.2012-11-27
ABSOLUTE MAXIMUM RATINGS (T
a
=25°C)
PARAMETER SYMBOL RATINGS UNIT
Supply Voltage V+ 18 V
Power Dissipation P
D
(DIP8) 1000(Note1) mW
(DMP8) 580(Note1) mW
(SSOP8) 480(Note1) mW
(SIP8) 1600(Note1) mW
Operating Temperature Range T
opr
-40 to +85 °C
Storage Temperature Range T
stg
-40 to +125 °C
Note1: Mounted on the EIA/JEDEC standard board (76.2×114.3×1.6mm, four layer, FR-4).
ELECTRICAL CHARACTERISTICS (V
+
=5 to 15V, T
a
=25°C)
PARAMETER SYMBOL TEST CONDITION MIN. TYP. MAX. UNIT
Operating Voltage V
+
4.5 - 16 V
Operating Current I
CC
V
+
=5V, R
L
=(Note 2) - 3.0 6.0 mA
Operating Current I
CC
V
+
=15V, R
L
=(Note 2) - 10 15 mA
Timing Error
Initial Accuracy E
t
T
a
=-20 to 75°C, V
+
=5 to 15V(Note 3) - 1.0 - %
Drift with Temperature E
t
T
a
=-20 to 75°C, V
+
=5 to 15V(Note 3) - 50 - ppm / °C
Drift with Supply Voltage E
t
T
a
=-20 to 75°C, V
+
=5 to 15V(Note 3) - 0.1 - % / V
Threshold Voltage V
th
- 2 / 3 - ×V
+
Trigger Voltage V
T
V
+
=15V - 5.0 - V
Trigger Voltage V
T
V
+
=5V - 1.67 - V
Trigger Current I
T
- 0.5 - µA
Reset Voltage V
R
0.4 0.5 1.0 V
Reset Current I
R
- 0.1 - mA
Threshold Curret I
th
- 0.1 0.25 µA
Control Voltage Level V
CL
V
+
=15V 9 10 11 V
Control Voltage Level V
CL
V
+
=5V 2.6 3.33 4.0 V
Output Voltage (Low) V
OL
V
+
=15V Isink=10mA - 0.1 0.25 V
Output Voltage (Low) V
OL
V
+
=15V Isink=50mA - 0.4 0.75 V
Output Voltage (Low) V
OL
V
+
=15V Isink=100mA - 2.0 2.5 V
Output Voltage (Low) V
OL
V
+
=15V Isink=200mA - 2.5 - V
Output Voltage (Low) V
OL
V
+
=5V Isink=5mA - 0.25 0.35 V
Output Voltage (High) V
OH
V
+
=15V Isource=200mA - 12.5 - V
Output Voltage (High) V
OH
V
+
=15V Isource=100mA 12.75 13.3 - V
Output Voltage (High) V
OH
V
+
=15V Isource=40mA - 13.5 - V
Output Voltage (High) V
OH
V
+
=5V Isource=100mA 2.75 3.3 - V
Rise time of Output t
r
No Loading - 100 - ns
Fall time of Output t
f
No Loading - 100 - ns
Note 2 : Low output condition (When the output is high, it is lower than the low output condition by 1mA in the standard specificatio.)
Note 3 : R
A
, R
B
=1k to 100k, C=0.1µF, V
+
=15V from 5V
NJM555
-
3
-
Ver.2012-11-27
TYPICAL APPLICATION
(1) 50% Duty Cycle Oscillator
(2) Oscillation frequency can be changed by changing the control voltage.
(3) Pulse Width Modulation

NJM555D

Mfr. #:
Manufacturer:
NJR (New Japan Radio)
Description:
Timers & Support Products Single
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet