SFH636
www.vishay.com
Vishay Semiconductors
Rev. 1.8, 03-Aug-15
1
Document Number: 83681
For technical questions, contact: optocoupleranswers@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
High Speed Optocoupler, Phototransistor Output, 1 MBd,
10 kV/μs CMR, Split Collector Transistor Output
DESCRIPTION
The SFH636 is an optocoupler with a GaAlAs infrared
emitting diode, optically coupled to an integrated photo
detector consisting of a photo diode and a high speed
transistor in a DIP-6 plastic package. The device is
functionally similar to 6N136 except there is no base
connection and the foot print is different. Noise and
common mode rejection performance is enhanced by not
bringing out the base connection.
Signals can be transmitted between two electrically
separated circuits up to frequencies of 2.0 MHz.
FEATURES
• High CMR of 10 kV/μs
• High speed optocoupler without base connection
• GaAlAs emitter
• Integrated detector with photo diode and
transistor
• TTL and CMOS compatible
• Open collector output
• Supply voltage up to 30 V
• High CTR
• Good CTR linearity relative to forward current
• Low coupling capacitance
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
APPLICATIONS
• IGBT drivers and MOSFET driver stages
• Data communications
• Programmable controllers
• IPM drivers
AGENCY APPROVALS
• UL1577, file no. E52744, double protection
• cUL tested to CSA 22.2 bulletin 5A
• DIN EN 60747-5-5 (VDE 0884-5), available with option 1
Note
• Additional options may be possible, please contact sales office
ORDERING INFORMATION
SFH636-X0##T
PART NUMBER PACKAGE OPTION TAPE
AND
REEL
AGENCY CERTIFIED/PACKAGE CTR (%)
UL ≥ 19
DIP-6 SFH636
SMD-6, option 7 SFH636-X007, SFH636-X007T
SMD-6, option 9 SFH636-X009
VDE, UL ≥ 19
DIP-6 SFH636-X001
DIP-6, option 6 SFH636-X016
SMD-6, option 7 SFH636-X017, SFH636-X017T
7.62 mm
DIP-#
> 0.6 mm
Option 7 Option 9
> 8 mm
10.16 mm
Option 6