CENB1030A0503F01

______________________________________________________________________________________________________________________________ 1 of 2
SL Power Electronics Corp 6050 King Drive Ventura, CA 93003 Phone 805.486.4565 Fax 858.712.2040 Email: info@slpower.com www.slpower.com
RoHS
LPS
Specifications All Specifications are typical at nominal input, full load at 25
°
C unless otherwise stated.
AC Input 100-240VAC, -/-10%, 47-63 Hz, 1
MTBF
>
100,000 hours calculated
Input Current
100VAC: 0.9A
Hold
-
up Time
18 ms min. @ 115VAC, 60 msec @ 230VAC
Inrush Current
60A peak, 264Vac, cold start
urn
-
on Time
2 seconds, max.
Input Fuse
3.15A Internal Primary Current Fuse is provided
Topology
Switching – Fixed Frequency Flyback
Efficiency
Meets EISA2007, CEC Efficiency Level V,
and EU(EC) No. 278/2009 Phase II requirements
Overload Protection
Hiccup Mode
Output Voltage
See chart
Short Circuit Protection
Hiccup Mode
Output Power
See chart
EMC
See chart below
Ripple and Noise
1% pk-pk max., 20MHz BW
Safety Standards
EN/IEC/CSA/UL60950-1, 2nd Edition, LPS
Line & Load Voltage Regulation
Line: +/- 1%, Load: +/-5%
Dielectric Withstand
Input-Output: 4,242VDC, Input-GND: 1,500 Vac,
Output-GND: 500Vdc
Transient Response
500μs max., 50% load step, typical
Operating Temperature 0
°
to 40
°
C, no derating
Minimum Load
Not required
Storage Temperature -40
°
to +85
°
C
Case Material:
Black 94V0 Polycarbonate
Relative Humid
ity
5% to 95%, non-condensing
Case Dimensions:
95 x 54 x 31mm. See outline drawing
Weight = 200g
Altitude
0 to 10,000 ft
Output
C
onnector:
2.5mm barrel type (Ault #3) connector,
center contact (+). Other options available
Output C
able
:
5V – 9V models:
#
18AWG (SPT-1), 1,500mm, 2 conductor
12V – 48V models: #18AWG (UL1185), 1,500mm, 2 conductor
EMC Specifications
Conducted Emissions
EN55022 Class B, FCC Part 15, Class B.
Radiated Emissions
EN55022 Class B, FCC Part 15, Class B.
Line Frequency Harmonics
EN61000-3-2, Class A
Voltage Fluctuations/Flicker
EN61000-3-3
Static Discharge Immunity
EN61000-4-2, 6kV Contact Discharge, 8kV air discharge
Radiated RF Immunity
EN61000-4-3, 3V/m.
EFT/Burst Immunity
EN61000-4-4, 2kV/5kHz.
Line Surge Immunity
EN61000-4-5, 1kV differential, 2kV common-mode
Conducted RF Immunity
EN61000-4-6, 3Vrms
Power Frequency Magnetic Field Immunity
EN61000-4-8, 3A/m
Voltage Dip Immunity
EN61000-4-11, Criteria B
CENB1030
Universal 30 Watt Series
ITE Switch-Mode Power Supply 3 Year Warranty
100-240VAC Universal Input
Meets EISA2007, CEC Efficiency Level V,
EU (EC) No 278/2009 Phase II
Certified to UL/EN60950-1, 2
nd
Edition
5Vto 48V outputs, up to 32W
Modified and Custom Designs Available
Regulated Output with Low Ripple
Impact-Resistant Polycarbonate Enclosure
No load Power Consumption <0.3W
Limited Power Source
Desktop & Wall Plug Styles
______________________________________________________________________________________________________________________________ 2 of 2
SL Power Electronics Corp 6050 King Drive Ventura, CA 93003 Phone 805.486.4565 Fax 858.712.2040 Email: info@slpower.com www.slpower.com
CENB1030
Universal 30 Watt Series
Model Number Volts (V) Output Current (max) Max Watts Ripple (Vp-p max)
CENB1030A0503F01 5 V 4.00 A 20.0 W 50 mV
CENB1030A0703F01 7.5 V 3.00 A 22.5 W 75 mV
CENB1030A0903F01 9 V 3.00 A 27.0 W 90 mV
CENB1030A1203F01 12 V 2.50 A 30.0 W 120 mV
CENB1030A1403F01 14 V 2.10 A 29.4 W 140 mV
CENB1030A1503F01 15 V 2.00 A 30.0 W 150 mV
CENB1030A1803F01 18 V 1.67 A 30.0 W 180 mV
CENB1030A2403F01 24 V 1.33 A 31.9 W 240 mV
CENB1030A4803F01 48 V 0.67 A 32.1 W 480 mV
Notes: Part numbers above include #3 output connector and IEC320 C14 grounded input receptacle. See below for other options.
Model "A" = Original Configuration
Product Family: "C" = Commercial/ITE/Industrial, "E" = External, "NB" = Model Series Designator
Output Power: "030" = 30 Watts
# of Outputs "1" = Single Output
"01" = Standard. "02" and higher indicates a modified model.Model
Output Voltage: "05" = 5Vdc, "12" = 12Vdc, "24" = 24Vdc, etc.
Input Connector: "F" = IEC320 C14 grounded, Other options available, see below
Output Connector: "03" = 2.5mm Barrel Type Connector. Other options available, contact factory.
Model Number Key
VV 03
CENB
011
030
A F
IEC320 - C14 IEC320 - C18 IEC320 - C8 N. America N. America Europe United Australia
Class I Class II Class II Japan Japan Kingdom
Grounded Ungrounded "Shaver" Interchangable Fixed Fixed Fixed Fixed
(F)
(Q)
(N)
(C)
(B)
(M)
(G)
(H)
Notes:
Notes:
1. Ault #3 Connector, center contact (+).
2. Connector is Switchcraft 760 plug or equivalent.
Mating connector is Switchcraft 712A or equivalent.
3. Other connector options are available. Contact your local
SL Power Representative for details.
Output Connector
the receptacle chosen. The N. A. blade version (C) will be an interchangeable blade.
3. Blade Kit is available which will include one each of a EU, UK, and Australian blade. Kit part #
2. For Wall-Plug options, choose the applicable letter above and the unit will be fitted with
is KT1027K. These can be used with the (C) version, to allow blades to be changed.
The other options (B), (M), (G), and (H) will be fixed blades molded in the case.
AC Input Receptacle Options
Desktop
1. For desktop options, choose applicable letter above.
Wall-Plug
Desktop Style Wall-plug Style “C” Option Shown (with KT1027K interchangeable blade kit)
Data Sheet © 2014 SL Power Electronics Corp. The information and specifications contained herein are believed to be correct at the time of publication. Rev. 9-22-14
However, SL Power accepts no responsibility for consequences arising from reproduction errors or inaccuracies. Specifications are subject to change without notice.
Outline Drawings
ITE Switch Mode Power Supply 3 Year Warranty
DATE
CODE

CENB1030A0503F01

Mfr. #:
Manufacturer:
Description:
Plug-In AC Adapters Desktop AC Adapters 20W 5V @ 4A - C14 Desktop/Enrgy Star V
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union