DM80-01-3/4 CML
TM
Butterfly Transmitter Product Specification – May 2007
F i n i s a r
Finisar Corporation –24-May-07 Rev_A Page 9
Electro-Static Discharge (ESD)
The device meets the ESD Class 3 requirements of the Telcordia standard TR-NWT-
000870 Issue 1, dated February 1991.
IX. Order Information
Product code
For the product specified in this document, the proper product code shall be:
DM80-01-3 ( or -4) -xxxx-3-LC-yyyy
This product code should be specified when placing a purchase order.
• “01” indicates a butterfly box module as specified in this document.
• “3” indicates the laser wavelength can be tuned over a sub-band to cover 8 ITU-T
channels with 50GHz spacing; -“4” indicates the laser wavelength can be tuned
over a sub-band to cover 4 ITU-T channels with 100GHz spacing.
• “xxxx” is the channel ID as specified in Table 9 and Table 10. For 4 X 100GHz
option (-(-“4” for the wavelength selection field), “xxxx” indicates a sub-band
which consists of channel “xxxx”, 2 adjacent 100GHz channels on the longer
wavelength (lower frequency) side, and 1 adjacent 100GHz channel on the shorter
wavelength (higher frequency) side. Example: channel “9230” for this option
indicates a sub-band consisting of 4 channels on ITU-T 100GHz grids at
frequencies of 192100GHz, 192200GHz, 192300GHz, and 192400GHz. For 8 X
50GHz option (-“3” for the wavelength selection field), “xxxx” indicates a sub-
band which consists of channel “xxxx”, 4 adjacent 50GHz channels on the longer
wavelength (lower frequency) side, and 3 adjacent 50GHz channels on the shorter
wavelength (higher frequency) side. Example: channel “9230” for this option
indicates a sub-band consisting of 8 channels on ITU-T 50GHz grids at
frequencies of 192100GHz, 192150GHz, 192200GHz, 192250GHz, 192300GHz,
192350GHz, 192400GHz, and 192450GHz.
• “3” indicates modulated output power range is >4dBm. Please contact Finisar if
different power level is needed.
• “LC” indicates the fiber connector is LC type. FC and other connector types are
also available.
• “yyyy” indicates any special customized request and need to be agreed with
Finisar prior to ordering