OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

FTLF1319F1GTL

P1-P3P4-P6P7-P9P10-P10
F i n i s a r
© Finisar Corporation October 25, 2011 Rev. D2 Page 1
Product Specification
2 Gigabit RoHS Compliant Long-Wavelength 2x5 Pin SFF Transceiver
FTLF1319F1xTL
PRODUCT FEATURES
• Up to 2.125Gb/s bi-directional
data links
• Standard 2x5 pin SFF footprint
(MSA compliant)
• 1310nm Fabry-Perot laser
transmitter
• Duplex LC connector
• RoHS compliant and Lead Free
• Very low jitter
• Up to 10 km on 9/125μm SMF
• Metal enclosure, for lower EMI
• Single 3.3V power supply
• Low power dissipation <700mW
• Industrial operating temperature
range: -40°C to 85°C
APPLICATIONS
• 1.25 Gb/s 1000Base-LX Ethernet
• Dual Rate 1.063 / 2.125 Gb/s Fibre
Channel
Finisar’s FTLF1319F1xTL Small Form Factor (SFF) transceivers comply with the 2x5
standard package defined by the Small Form Factor Multi-Sourcing Agreement (MSA)
1
.
They are simultaneously compatible with Gigabit Ethernet as specified in IEEE Draft
P802.3z/D5.0
2
and Fibre Channel FC-PH, PH2, PH3
3
and FC-PI-2 10.0
4
. They are RoHS
compliant and lead-free per Directive 2002/95/EC
5
and Finisar Appl. Note AN-2038.
PRODUCT SELECTION
FTLF1319F1xTL
x
G
2 Grounding Pins, Short EMI shield
M
6 Grounding Pins, Short EMI shield
K
2 Grounding Pins, Long EMI shield
H
6 Grounding Pins, Long EMI shield
FTLF1319F1xTL 2x5 Pin SFF Product Specification – October 2011 F i n i s a r
© Finisar Corporation October 25, 2011 Rev. D2 Page 2
I. Pin Descriptions
Pin Symbol Name/Description Logic Family
MS MS
Mounting Studs are for mechanical attachment. Chassis
ground is internally isolated from circuit ground.
Connection to chassis ground is recommended.
NA
1 V
EER
Receiver Ground (Common with Transmitter Ground) NA
2 V
CCR
Receiver Power Supply NA
3 SD Signal Detect. Logic 1 indicates normal operation. LVTTL
4 RD-
Receiver Inverted DATA out. AC Coupled. See Rx spec.
5 RD+ Receiver Non-inverted DATA out. AC Coupled See Rx spec.
6 V
CCT
Transmitter Power Supply NA
7 V
EET
Transmitter Ground (Common with Receiver Ground) NA
8 T
DIS
Transmitter Disable LVTTL
9 TD+ Transmitter Non-Inverted DATA in. AC Coupled. See Tx spec
10 TD-
Transmitter Inverted DATA in. AC Coupled. See Tx spec.
II. Absolute Maximum Ratings
Parameter Symbol Min Typ Max Unit Ref.
Maximum Supply Voltage Vcc 0.5 5.0 V
Storage Temperature T
S
-40 85
°C
Case Operating Temperature T
A
-40 85
°C
Relative Humidity RH 0 85 % 1
Lead Soldering Temperature/Time 260/10
°C/s
Notes:
1. Non condensing.
TOP VIEW
1 2 3 4 5
10 9 8 7 6
MS
MS
FTLF1319F1xTL 2x5 Pin SFF Product Specification – October 2011 F i n i s a r
© Finisar Corporation October 25, 2011 Rev. D2 Page 3
III. Electrical Characteristics (T
A
= -40 to 85 °C, V
CC
= 3.0 to 3.60 Volts)
Parameter Symbol Min Typ Max Unit Ref.
Supply Voltage Vcc 3.00 3.60 V
Supply Current Icc 300 mA
Transmitter
Input differential impedance R
in
100
Ω
1
Single ended data input swing Vin,pp 250 1200 mV
Transmit Disable Voltage V
D
Vcc – 1.3 Vcc V
Transmit Enable Voltage V
EN
Vee Vee+ 0.8 V 2
Transmit Disable Assert Time 10 us
Receiver
Single ended data output swing Vout,pp 300 800 mV 3
Data output rise time t
r
100 175 ps 4
Data output fall time t
f
100 175 ps 4
Signal Detect Normal V
SD norm
Vcc – 0.5 Vcc V 5
Signal Detect Fault V
SD faul
t
Vee Vee+0.5 V 5
Power Supply Rejection PSR 100 mVpp 6
Deterministic Jitter Contribution
(p-p)
RX ∆DJ
50 ps 7
Total Jitter Contribution (p-p) RX ∆TJ 120 ps 8
Notes:
1. AC coupled.
2. Or open circuit.
3. Into 100 Ω differential termination.
4. 20 – 80 %
5. Signal detect is LVTTL. Logic 1 indicates normal operation; logic 0 indicates no signal detected.
6. Receiver sensitivity is compliant with power supply sinusoidal modulation of 20 Hz to 1.5 MHz
up to specified value applied through the recommended power supply filtering network.
7. Measured with DJ-free data input signal. In actual application, output DJ will be the sum of input
DJ and ∆DJ.
8. If measured with TJ-free data input signal. In actual application, output TJ will be given by:
()()
22
DJTJDJTJDJDJTJ
INININOUT
Δ−Δ+−+Δ+=
P1-P3P4-P6P7-P9P10-P10

FTLF1319F1GTL

Mfr. #:
Buy FTLF1319F1GTL
Manufacturer:
Finisar Corporation
Description:
Fiber Optic Transmitters, Receivers, Transceivers GigE 1x/2x FC 2.125 Gb/s trnscvr 10km
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet