THIS DOCUMENT CONTAINS CONFIDENTIAL AND
PROPRIETARY INFORMATION AND ALL DESIGN,
MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS
AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,
INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE
OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR
REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS
WRITTEN CONSENT OF SAMTEC, INC.
PROPRIETARY NOTE
*
*
DO NOT
SCALE FROM
THIS PRINT
.172
REF
4.37
FLE-75-D-XX
.131
REF
3.33
(SEE NOTE 8)
(NO OF POSITIONS x .0500 [1.270] + .0045 [0.114]
.050
REF
1.27
(NO OF POSITIONS -1) x .0500 [1.270]
3
MAX SWAY
(EITHER DIRECTION)
C
+.0065[+0.165]
-.0050[ -0.127]
.0250
REF
0.63
.1809
REF
4.59
90°
±3°
.179 4.55
(MEASURE AT BEND)
.039 0.99
REF
SEE NOTE 6
C-96-01-XX
C
C
SEE NOTE 2
FLE-1XX-XX-XX-DV-X
No OF POSITIONS
-02 THRU -75
(PER ROW)
LEAD STYLE
-01: SURFACE MOUNT
(USE C-96-01-XX)
PLATING SPECIFICATION
-G: 10µ" GOLD IN CONTACT AREA,
3µ" GOLD ON TAIL
-H: 30µ" HEAVY GOLD IN CONTACT AREA,
3µ" GOLD ON TAIL
-GF: 3µ" ON ENTIRE CONTACT
BODY SPECIFICATION
-DV: DOUBLE VERTICAL
(USE FLE-75-D-XX)
OPTION
-A: ALIGNMENT PIN (SEE FIG 2 & 3, SHT 2)
(USE FLE-XX-D-XX)
(MOLDED TO POSITION OR STAKED)
(SAMTEC'S DISCRETION WHICH -A PIN IS USED)
(MOLDED 3 POSITION MINIMUM)
(STAKED 7 POSITION MINIMUM)
-P: PICK AND PLACE PAD (SEE FIG 4, SHT 2)
(USE LMP-09, -05 POSITIONS MIMIMUM)
-K: POLYIMIDE FILM PAD (SEE FIG 6, SHT 2)
(USE K-DOT-.167-.281-.005)
(-05 POSITIONS MIMIMUM)
-TR: TAPE & REEL
C
FIG 1
FLE-1XX-01-X-DV SHOWN
C
SHEET OF
UNLESS OTHERWISE SPECIFIED,
DIMENSIONS ARE IN INCHES.
TOLERANCES ARE:
DECIMALS ANGLES
.XX:
.01 [.3] 2
.XXX:
.005 [.13]
.XXXX:
.0020 [.051]
MATERIAL:
BY:
FLE-1XX-XX-XX-DV-X
DWG. NO.
DESCRIPTION:
DO NOT SCALE DRAWING
D PURVIS
11/05/96
2
1
SHEET SCALE: 3:1
F:\DWG\MISC\MKTG\FLE-1XX-XX-XX-DV-X-MKT.SLDDRW
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail info@SAMTEC.com code 55322
NOTES:
1. REPRESENTS A CRITICAL DIMENSION.
2. COPLANARITY: POSITIONS -2 THRU -26: .004 [.10]
POSITIONS -27 THRU -75: .006 [.15]
3. MINIMUM PUSHOUT FORCE: .5 LB.
4. PACKAGE POSITIONS -05 THRU -75 IN TUBES;
PACKAGE POSITIONS -02 THRU -04 IN ASBBLT4X5.5 BUBBLE BAGS.
5. FOR EVERY FINISHED PART, ONE POSITION WILL BE LOST
WHEN CUTTING BODY TO LENGTH.
6. MAXIMUM BURR ALLOWANCE: .003 [.08].
7. MAXIMUM CUT FLASH: .010 [.25] MAX WITH NO FLASH
ALLOWED IN HOLES OR EXTENDING BELOW LEADS.
8. THIS DIMENSION FOR 75 POSITIONS IS 3.759[95.47] REF.
DUAL ROW .050 [1.27 X .050 [1.27] STRIP ASSEMBLY
INSULATOR: VECTRA E130i, COLOR: BLACK
CONTACT: PHOS BRONZE
REVISION AI
