www.fairchildsemi.com 2
74LVQ08
Absolute Maximum Ratings(Note 1) Recommended Operating
Conditions
(Note 2)
Note 1: The “Absolute Maximum Ratings” are those values beyond which
the safety of the device cannot be guaranteed. The device should not be
operated at these limits. The parametric values defined in the Electrical
Characteristics tables are not guaranteed at the absolute maximum ratings.
The “Recommended Operating Conditions” table will define the conditions
for actual device operation.
Note 2: Unused inputs must be held HIGH or LOW. They may not float.
DC Electrical Characteristics
Note 3: All outputs loaded; thresholds on input associated with output under test.
Note 4: Maximum test duration 2.0 ms, one output loaded at a time.
Note 5: Incident wave switching on transmission lines with impedances as low as 75Ω for commercial temperature range is guaranteed for 74LVQ.
Note 6: Worst case package.
Note 7: Max number of outputs defined as (n). Data inputs are driven 0V to 3.3V; one output at GND.
Note 8: Max number of Data Inputs (n) switching. (n − 1) inputs switching 0V to 3.3V. Input-under-test switching: 3.3V to threshold (V
ILD
), 0V to threshold
(V
IHD
), f = 1 MHz.
Supply Voltage (V
CC
) −0.5V to +7.0V
DC Input Diode Current (I
IK
)
V
I
= −0.5V −20 mA
V
I
= V
CC
+ 0.5V +20 mA
DC Input Voltage (V
I
) −0.5V to V
CC
+ 0.5V
DC Output Diode Current (I
OK
)
V
O
= −0.5V −20 mA
V
O
= V
CC
+ 0.5V +20 mA
DC Output Voltage (V
O
) −0.5V to V
CC
+ 0.5V
DC Output Source
or Sink Current (I
O
) ±50 mA
DC V
CC
or Ground Current
(I
CC
or I
GND
) ±200 mA
Storage Temperature (T
STG
) −65°C to +150°C
DC Latch-Up Source or
Sink Current ±100 mA
Supply Voltage (V
CC
) 2.0V to 3.6V
Input Voltage (V
I
) 0V to V
CC
Output Voltage (V
O
) 0V to V
CC
Operating Temperature (T
A
) −40°C to +85°C
Minimum Input Edge Rate (
∆V/∆t)
V
IN
from 0.8V to 2.0V
V
CC
@ 3.0V 125 mV/ns
Symbol Parameter
V
CC
T
A
= +25°CT
A
= −40°C to +85°C
Units Conditions
(V) Typ Guaranteed Limits
V
IH
Minimum High Level
3.0 1.5 2.0 2.0 V
V
OUT
= 0.1V
Input Voltage or V
CC
− 0.1V
V
IL
Maximum Low Level
3.0 1.5 0.8 0.8 V V
OUT
= 0.1V
Input Voltage
V
OH
Minimum High Level 3.0 2.99 2.9 2.9 V I
OUT
= −50 µA
Output Voltage
3.0 2.58 2.48 V
V
IN
= V
IL
or V
IH
(Note 3)
I
OH
= −12 mA
V
OL
Maximum Low Level 3.0 0.002 0.1 0.1 V I
OUT
= 50 µA
Output Voltage
3.0 0.36 0.44 V
V
IN
= V
IL
or V
IH
(Note 3)
I
OL
= 12 mA
I
IN
Maximum Input
3.6 ±0.1 ±1.0 µAV
I
= V
CC
, GND
Leakage Current
I
OLD
Minimum Dynamic 3.6 36 mA V
OLD
= 0.8V Max (Note 5)
I
OHD
Output Current (Note 4) 3.6 −25 mA V
OHD
= 2.0V Min (Note 5)
I
CC
Maximum Quiescent
3.6 2.0 20.0 µA
V
IN
= V
CC
Supply Current or GND
V
OLP
Quiet Output
3.3 0.4 0.8 V (Note 6)(Note 7)
Maximum Dynamic V
OL
V
OLV
Quiet Output
3.3 −0.4 −0.8 V (Note 6)(Note 7)
Minimum Dynamic V
OL
V
IHD
Maximum High Level
3.3 1.8 2.0 V (Note 6)(Note 8)
Dynamic Input Voltage
V
ILD
Maximum Low Level
3.3 1.8 0.8 V (Note 6)(Note 8)
Dynamic Input Voltage
