008641-2-EN IL50 GLO
April 2009
Copyright © 2009 Honeywell International Inc. All rights reserved.
Model 13 Subminiature Load Cell
Sensing and Control
Honeywell
1985 Douglas Drive North
Golden Valley, MN 55422
www.honeywell.com
NOTES
1. Allowable maximum loads – maximum load to be applied without
damage.
2
Loads described allow for 100 % full scale axial loading
with the bending loads specified. Torque loading maximum is with-
outaxialorotherload.Foranyothercombination,consultfactory.
2. Without damage - loading to this level will not cause excessive zero
shift or performance degradation. The user must consider fatigue
life for long term use and structural integrity. All structurally critical
applications (overhead loading, etc.) should always be designed
with safety redundant load paths.
3. A small, 2 in circuit board is included in the cable, 2 ft from the load
cell. Do not remove this board.
4. Only for ranges greater-than-or-equal-to 1000 g.
5. Specicationsmayvarywiththisoption.
6. This unit calibrated to Imperial (non-Metric) units.
Warranty. Honeywell warrants goods of its manufacture as
being free of defective materials and faulty workmanship.
Honeywell’s standard product warranty applies unless agreed
to otherwise by Honeywell in writing; please refer to your
order acknowledgement or consult your local sales office for
specific warranty details. If warranted goods are returned to
Honeywell during the period of coverage, Honeywell will repair
or replace, at its option, without charge those items it finds
defective. The foregoing is buyer’s sole remedy and is in lieu
of all warranties, expressed or implied, including those of
merchantability and tness for a particular purpose. In no
event shall Honeywell be liable for consequential, special, or
indirect damages.
While we provide application assistance personally, through our
literature and the Honeywell web site, it is up to the customer to
determine the suitability of the product in the application.
WARNING
PERSONAL INJURY
•DONOTUSEtheseproductsassafetyoremergency
stop devices or in any other application where failure of
the product could result in personal injury.
Failure to comply with these instructions could result in
death or serious injury.
WARNING
MISUSE OF DOCUMENTATION
•Theinformationpresentedinthisdatasheetisfor
referenceonly.DONOTUSEthisdocumentasproduct
installation information.
•Completeinstallation,operationandmaintenance
information is provided in the instructions supplied with
each product.
Failure to comply with these instructions could result in
death or serious injury.
Find out more
Honeywell serves its customers
through a worldwide network of
sales offices, representatives
anddistributors.Forapplication
assistance, current specifica-
tions, pricing or name of the
nearest Authorized Distributor,
contact your local sales office.
To learn more about Honeywell’s
test and measurement products,
call +1-614-850-5000, visit
www.honeywell.com/sensotec,
or e-mail inquiries to
info.tm@honeywell.com
