FL7760
www.onsemi.com
4
Table 2. MAXIMUM RATINGS
Symbol Rating Value Unit
VIN
(MAX)
Maximum VIN Pin Voltage Range −0.3 to 70 V
SEN
(MAX)
Maximum SEN Pin Voltage Range −0.3 to 70 V
VCC
(MAX)
VCC Pin Voltage Range −0.3 to 5.5 V
VDIM
(MAX)
DIM Pin Voltage Range −0.3 to 5.5 V
VDRV
(MAX)
DRV Pin Voltage Range −0.3 to 5.5 V
T
J(MAX)
Maximum Junction Temperature 150 °C
T
STG
Storage Temperature Range −65 to 150 °C
R
q
JA
Junction−to−Ambient Thermal Impedance 263 °C/W
P
D
Power Dissipation 247 mW
ESD
HBM
ESD Capability, Human Body Model (Note 2) 1.2 kV
ESD
CDM
ESD Capability, Charged Device Model (Note 2) 2 kV
Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality
should not be assumed, damage may occur and reliability may be affected.
1. Refer to ELECTRICAL CHARACTERISTICS, RECOMMENDED OPERATING RANGES and/or APPLICATION INFORMATION for Safe
Operating parameters
2. This device series incorporates ESD protection and is tested by the following methods
ESD Human Body Model tested per AEC−Q100−002 (EIA/JESD22−A114)
ESD Machine Model tested per AEC−Q100−003 (EIA/JESD22−A115)
Latchup Current Maximum Rating: v150 mA per JEDEC standard: JESD78
Table 3. ORDERING INFORMATION
Device Package Shipping
†
FL7760AM6X 6LD,SOT23, JEDEC MO−178 VARIATION AB, 1.6MM WIDE Tape & Reel
FL7760BM6X 6LD,SOT23, JEDEC MO−178 VARIATION AB, 1.6MM WIDE Tape & Reel
Table 4. RECOMMENDED OPERATING RANGES
Rating Symbol Min Max Unit
Ambient Temperature T
A
−40 125 °C
Functional operation above the stresses listed in the Recommended Operating Ranges is not implied. Extended exposure to stresses beyond
the Recommended Operating Ranges limits may affect device reliability.
Table 5. ELECTRICAL CHARACTERISTICS
(V
CC
= 5 V, For typical values T
j
= 25°C, for min/max values T
j
= −40°C to +125°C, Max T
j
= 150°C, unless otherwise noted)
Characteristics Condition Symbol Min Typ Max Unit
VIN SECTION
Self BIAS Start Threshold Voltage
V
CC
= 5 V V
IN,ON
7.05 7.5 7.95 V
Self BIAS Stop Threshold Voltage V
CC
= 5 V V
IN,OFF
6.55 7 7.45 V
Self BIAS Current for Startup (Note 3) I
ST
2 mA
VCC SECTION
VCC Regulator Output Voltage
V
VIN
= 24 V
DC
V
CC
4.5 5 5.5 V
IC Start Threshold Voltage V
CC
Increasing V
CC,ON
4.04 4.50 4.95 V
Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product
performance may not be indicated by the Electrical Characteristics if operated under different conditions.
3. This item is guaranteed by design.
4. This is only a recommended specification and there is no limit to the PWM Dimming frequency.
5. Drift after IC reliability test (JEDEC JESD22−A08) is not included.
6. This value indicates the change in internal reference voltage with temperature change and indicates the rate of change based on 25 °C
ambient temperature. This item is guaranteed by design.
