OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

H100

P1-P3P4-P6P7-P9P10-P12P13-P15P16-P16
4-6 Data Record
a. The data record function records the maximum and minimum readings.
Press the “REC Button” (4-4, Fig. 1) to start the data record function.
b. With the “REC” symbol on the display momentarily pressing the “REC
Button” (4-4, Fig. 1) will toggle between Max and Min recording.
c. To exit the memory record function, press and hold the “REC Button” (4-4,
Fig. 1) for at least 3 seconds.
d. Note: To delete the displayed value while recording, just press the “Hold
Button” (4-3, Fig. 1) until the display clears the data leaving the “REC”
symbol.
5. Auto Power Off Disable
This instrument has a “Auto Power Off " function that can prolong battery life. The meter will
shut off automatically if none of the buttons are pressed in approx. 10 min.
To disable this function, select the memory record function during a measurement by pressing
the " REC. Button” (4-4, Fig. 1 ).
9
6. RS232 PC Serial Interface Information
This instrument has RS232 PC serial interface via a 3.5 mm terminal (4-12, Fig. 1).
The data output is a 16 digit stream which can be utilized for user's specific application.
A RS232 lead with the following connection will be required to link the instrument with the PC
serial port.
Visit
www.anaheimscientific.com to see any available downloadable software for your
instrument.
10
The 16 digit data stream will be displayed in the following format:
D15 D14 D13 D12 D11 D10 D9 D8 D7 D6 D5 D4 D3 D2 D1D0
Each digit indicates the following status:
D15 Start Word
D14
4
D13
When send the upper display data = 1
When send the lower display data = 2
D12 & D11
Indicator for Display
Lux = 15
Fc = 16
D10 Polarity: 0 = Positive / 1 = Negative
D9
Decimal Point (DP), position from right to left
0 = No DP, 1 = 1 DP, 2 = 2 DP, 3 = 3 DP
D8 to D1
Display reading, D1 = LSD, D8 = MSD
Example: If the display reading is 1234,
then D8 to D1 is: 00001234
D0
End Word
RS232 Setting
Baud Rate 9600
Parity
No Parity
Data bit #
8 Data bits
Stop bit
1 Stop bit
7. Battery Replacement
1. When the LCD display shows the “
” low battery symbol, It is necessary to
replace the battery. The specifications listed for this instrument do not apply when the
low battery symbol is displayed.
2. Open the “Battery Compartment” (4-11, Fig. 1) by first loosening the “Battery Cover
Screws” (4-17, Fig. 1).
3. Replace the batteries with “good” batteries noting the correct polarity. Replace
“Battery Compartment” (4-11, Fig. 1) and “Battery Cover Screws” (4-17, Fig. 1).
Ensure the cover is securely fastened.
11
P1-P3P4-P6P7-P9P10-P12P13-P15P16-P16

H100

Mfr. #:
Buy H100
Manufacturer:
Description:
HUB ZINC 1.00 INCHES WATERTITE
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet