LH1533AACTR
www.vishay.com
Vishay Semiconductors
Rev. 1.8, 03-Aug-11
1
Document Number: 83831
For technical questions, contact: optocoupleranswers@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Dual 1 Form A Solid-State Relay
DESCRIPTION
The LH1533 (dual 1 form A) relays are SPST normally open
switches that can replace electromechanical relays in many
applications. They are constructed using a GaAIAs LED
for actuation control and an integrated monolithic die
for the switch output. The die, fabricated in a high-voltage
dielectrically isolated technology is comprised of a
photodiode array, switch control circuitry, and MOSFET
switches. In addition, the relays employ current-limiting
circuitry, enabling them to pass lightning surge testing
as per ANSI/TIA-968-B and other regulatory surge
requirements when overvoltage protection is provided.
FEATURTES
• Dual channel (LH1550)
• Current limit protection
• Isolation test voltage 5300 V
RMS
• Typical R
ON
28
• Load voltage 350 V
• Load current 90 mA
• High surge capability
• Clean bounce free switching
• Low power consumption
• SMD lead available on tape and reel
• Compliant to RoHS Directive 2002/95/EC and in
accordance to WEEE 2002/96/EC
APPLICATIONS
• General telecom switching
- On/off hook control
- Ring delay
- Dial pulse
- Ground start
- Ground fault protection
• Instrumentation
• Industrial controls
i179034_9
1324
8675
S2'S2S1 S1'
S2'
S2
S1 S1'
V
DE
AGENCY APPROVALS
UL1577: file no. E52744 system code H, double
protection
CSA: certification no. 093751
BSI/BABT: certification no. 7980
DIN EN: 60747-5-2 (VDE 0884)/60747-5-5 (pending),
available with option 1
FIMKO: approval
ORDERING INFORMATION
LH1533A##TR
PART NUMBER ELECTR.
VARIATION
PACKAGE
CONFIG.
TAPE AND
REEL
PACKAGE UL, CSA, BSI, FIMKO
SMD-8, tape and reel LH1533AACTR