HCJ0402ZT0R00

Rev Date: 11/10/2017
1 www.seielect.com
This specification may be changed at any time without prior notice. marketing@seielect.com
Please confirm technical specifications before you order and/or use.
HCJ Series
Surface Mount High Current Jumper Chip Resistor
Stackpole Electronics, Inc.
Resistive Product Solutions
0
Percent Rated Power (%)
100
-55ºC
70ºC
80
60
40
20
180
155ºC
-60
0
20
40
60
80
100
120
140
160
Features:
Applications:
Power Derating Curve:
Chip size from 0402 to 2512
Max. resistance value less than 3 milliohm for 0402,
less than 0.5 milliohm for all other sizes
Qualified to AEC-Q200
RoHS compliant, lead-free and halogen-free
Electrical Specifications
Mechanical Specifications
Switching power supply
Voltage regulation module
DC-DC converter, adaptor, battery pack, charger
PDA and cell phone
Power management applications
HCJ0402 6.5
0.125 14.2 ≤ 0.003
HCJ0603 22.4
0.25 56
HCJ0805 31.6
0.5 79
HCJ1206 38.7
0.75 96.7
HCJ2512 63.2
2 158
Power rating: P=I
2
*R
Type / Code
Current Rating (A)
Ohmic Range (Ω)
Operating Temperature
Range
≤ 0.0005
-55ºC to +155°C
Power Rating (W)
Max Overload
Current (A)
Type / Code Unit
0.039 ± 0.004 0.020 ± 0.002 0.016 ± 0.002 0.012 ± 0.004 inches
1.00 ± 0.10 0.50 ± 0.05 0.40 ± 0.05 0.30 ± 0.10 mm
0.061 ± 0.004 0.031 ± 0.004 0.018 ± 0.004 0.014 ± 0.008 inches
1.55 ± 0.10 0.80 ± 0.10 0.45 ± 0.10 0.35 ± 0.20 mm
0.083 ± 0.006 0.053 ± 0.006 0.028 ± 0.004 0.022 ± 0.008 inches
2.10 ± 0.15 1.35 ± 0.15 0.70 ± 0.10 0.55 ± 0.20 mm
0.122 ± 0.008 0.061 ± 0.004 0.028 ± 0.004 0.031 ± 0.008 inches
3.10 ± 0.20 1.55 ± 0.10 0.70 ± 0.10 0.80 ± 0.20 mm
0.256 ± 0.008 0.126 ± 0.008 0.030 ± 0.004 0.033 ± 0.010 inches
6.50 ± 0.20 3.20 ± 0.20 0.75 ± 0.10 0.85 ± 0.25 mm
A
HCJ0603
HCJ0805
HCJ1206
HCJ2512
HCJ0402
L
W
t
Rev Date: 11/10/2017
2 www.seielect.com
This specification may be changed at any time without prior notice. marketing@seielect.com
Please confirm technical specifications before you order and/or use.
HCJ Series
Surface Mount High Current Jumper Chip Resistor
Stackpole Electronics, Inc.
Resistive Product Solutions
Environmental Performance Characteristics
Function Performance Characteristics
Test
Test Condition
Mount part to test substrate. Apply pressure in direction of arrow unit
band width reaches 0.5mm (+0.2/-0mm)(illustrated in the figure below)
and hold for 10 seconds ± 1 second.
Test Method
Test Specification
Resistance to
Solder Heat
MIL-STD-202,
Method 210
For 0402 size max. 0.003Ω
All other sizes max. 0.0005Ω
The part shall be immersed into the flux specified in the solder bath
260ºC ± 5ºC for 10 seconds ± 1 second
Bending Strength
JIS-C5202-6.1
For 0402 size max. 0.003Ω
All other sizes max. 0.0005Ω
Solderability
JIS-C5 202-6.11
Solder shall be covered 95%
or more of the electrode area
The part shall be immersed into the flux specified in the solder bath
235ºC ± 5ºC for 2 seconds ± 0.5 seconds. It shall be immersed to a
point 10mm from its root.
(Sn96.5/Ag3.0/Cu0.5)
Short Time Overload JIS-C5202-5.5 2.5X rated current for 5 seconds
Note: Test board surface temperature shall not exceed 100ºC when applying rated current.
Storage Conditions: 5ºC ~ 35ºC. RH: 40%-75%
Part (mounted on board) is exposed, -55ºC ± 3ºC (30 min.)/
+155°C ± 2ºC (30 minutes) for 5 cycles.
The following conditions as per picture below.
JIS-C5202-7.4
Test
Test Condition
Rapid Change of
Temperature
Specimens shall be placed in a chamber and subject to a relative
humidity of 90~95% and to a temperature of 40ºC ± 2ºC for
the period of 1000 hours
Damp Heat with Load
Part (mounted on board) is exposed in the heat chamber
125ºC ± 3ºC for 1000 hours
High Temperature
Exposure
Apply rated power at 70ºC ± 2ºC for 1000 hours with 1.5 hours ON
and 0.5 hour OFF
Load Life
Test Specification
For 0402 size max. 0.003Ω
All other sizes max. 0.0005Ω
Test Method
MIL-STD-202,
Method 103
JIS-C5202-7.2
JIS-C5202-7.10
Rev Date: 11/10/2017
3 www.seielect.com
This specification may be changed at any time without prior notice. marketing@seielect.com
Please confirm technical specifications before you order and/or use.
HCJ Series
Surface Mount High Current Jumper Chip Resistor
Stackpole Electronics, Inc.
Resistive Product Solutions
Taping Specifications Paper Tape
Taping Specifications Embossed Plastic Tape
Type / Code Unit
0.138 ± 0.004 0.268 ± 0.004 0.069 ± 0.004 0.217 ± 0.002 0.472 ± 0.008 inches
3.50 ± 0.10 6.80 ± 0.10 1.75 ± 0.10 5.50 ± 0.05 12.00 ± 0.20 mm
Unit
0.157 ± 0.002 0.157 ± 0.004 0.079 ± 0.002 0.059 ± 0.004 0.039 ± 0.008 inches
4.00 ± 0.05 4.00 ± 0.10 2.00 ± 0.05 1.50 ± 0.10 1.00 ± 0.20 mm
W
HCJ2512
A
B
E
F
P1
P2
D0
T
P0
Type / Code Unit
0.028 ± 0.002 0.047 ± 0.002 0.069 ± 0.004 0.138 ± 0.002 0.315 ± 0.008 inches
0.70 ± 0.05 1.20 ± 0.05 1.75 ± 0.10 3.50 ± 0.05 8.00 ± 0.20 mm
0.043 ± 0.004 0.075 ± 0.004 0.069 ± 0.004 0.138 ± 0.002 0.315 ± 0.008 inches
1.10 ± 0.10 1.90 ± 0.10 1.75 ± 0.10 3.50 ± 0.05 8.00 ± 0.20 mm
0.063 ± 0.004 0.094 ± 0.004 0.069 ± 0.004 0.138 ± 0.002 0.315 ± 0.008 inches
1.60 ± 0.10 2.40 ± 0.10 1.75 ± 0.10 3.50 ± 0.05 8.00 ± 0.20 mm
0.079 ± 0.004 0.142 ± 0.004 0.069 ± 0.004 0.138 ± 0.002 0.315 ± 0.008 inches
2.00 ± 0.10 3.60 ± 0.10 1.75 ± 0.10 3.50 ± 0.05 8.00 ± 0.20 mm
Type / Code Unit
0.157 ± 0.004 0.079 ± 0.004 0.079 ± 0.002 0.061 ± 0.002 0.018 ± 0.004 inches
4.00 ± 0.10 2.00 ± 0.10 2.00 ± 0.05 1.55 ± 0.05 0.45 ± 0.10 mm
0.157 ± 0.004 0.157 ± 0.004 0.079 ± 0.002 0.061 ± 0.002 0.025 ± 0.004 inches
4.00 ± 0.10 4.00 ± 0.10 2.00 ± 0.05 1.55 ± 0.05 0.64 ± 0.10 mm
0.157 ± 0.004 0.157 ± 0.004 0.079 ± 0.002 0.061 ± 0.002 0.038 ± 0.004 inches
4.00 ± 0.10 4.00 ± 0.10 2.00 ± 0.05 1.55 ± 0.05 0.97 ± 0.10 mm
0.157 ± 0.004 0.157 ± 0.004 0.079 ± 0.002 0.061 ± 0.002 0.038 ± 0.004 inches
4.00 ± 0.10 4.00 ± 0.10 2.00 ± 0.05 1.55 ± 0.05 0.97 ± 0.10 mm
HCJ0402
HCJ0603
HCJ0805
HCJ1206
W
A
B
E
F
HCJ1206
T
HCJ0402
HCJ0603
HCJ0805
P0
P1
P2
D0

HCJ0402ZT0R00

Mfr. #:
Manufacturer:
Description:
RES 0 OHM JUMPER 1/8W 0402
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union