UARTinterfaces
There are 2 UART interfaces available on the shield, routed from the mikromedia 7 for STM32.
One of the mikroBUS™ slots - mikroBUS 5 - can have either one of the two UART lines routed
to the mikromedia 7 for STM32, selectable by the mikroBUS™ 5 UART jumper selector. Other
4 mikroBUS™ slots are hardwired to one UART only.
The shield also has the FT232 USB to UART circuit on board. Its RX and TX lines can also be
routed to any of the two UART interface lines of the mikromedia 7 for STM32, by using the
UART SELECT jumper selectors. The integrated USB to UART interface is very handy for
connecting the shield to the computer and reading UART data on any UART terminal - it is
recommended to use the UART terminals, found in every MikroElektronika compiler since those
terminals are easy to use and are optimized for working in embedded development environment.
Note: If the WiFi SMD jumper is set to enable the WiFi on the mikromedia for STM32, one of
the UART lines won't be available on the shield.
Specifications
Type Shield
Applications
TheShieldprovidesthemostconvenientwayforconnectingclickboards™toyour
mikromedia7forSTM32F7andmikromedia7 forSTM32F4
On‐board
modules
5mikroBUS™sockets,externalpowersupplyscrewterminal,UARTselection,FTDIUSB‐
UARTconverter,microUSBconnector,two 1x26headers‐mikromediastandardpinout
Compatibility mikromedia
https://www.mikro e.com/mikromedia‐7‐for‐stm32‐shield12‐5‐17