For pricing, delivery, and ordering information, please contact Maxim/Dallas Direct! at
1-888-629-4642, or visit Maxim’s website at www.maxim-ic.com.
General Description
The MAX1090/MAX1092 low-power, 10-bit analog-to-
digital converters (ADCs) feature a successive-approxi-
mation ADC, automatic power-down, fast wake-up
(2µs), an on-chip clock, +2.5V internal reference, and a
high-speed, byte-wide parallel interface. The devices
operate with a single +5V analog supply and feature a
V
LOGIC
pin that allows them to interface directly with a
+2.7V to +5.5V digital supply.
Power consumption is only 10mW (V
DD
= V
LOGIC
) at a
400ksps max sampling rate. Two software-selectable
power-down modes enable the MAX1090/MAX1092 to
be shut down between conversions; accessing the par-
allel interface returns them to normal operation.
Powering down between conversions can cut supply
current to under 10µA at reduced sampling rates.
Both devices offer software-configurable analog inputs
for unipolar/bipolar and single-ended/pseudo-differen-
tial operation. In single-ended mode, the MAX1090 has
eight input channels and the MAX1092 has four input
channels (four and two input channels, respectively,
when in pseudo-differential mode).
Excellent dynamic performance and low power, com-
bined with ease of use and small package size, make
these converters ideal for battery-powered and data-
acquisition applications or for other circuits with demand-
ing power consumption and space requirements.
The MAX1090/MAX1092 tri-states INT when CS goes
high. Refer to the MAX1060/MAX1064 if tri-stating INT is
not desired.
The MAX1090 is available in a 28-pin QSOP package,
while the MAX1092 comes in a 24-pin QSOP. For pin-
compatible +3V, 10-bit versions, refer to the MAX1091/
MAX1093 data sheet.
Applications
Industrial Control Systems Data Logging
Energy Management Patient Monitoring
Data-Acquisition Systems Touchscreens
Features
♦ 10-Bit Resolution, ±0.5 LSB Linearity
♦ +5V Single-Supply Operation
♦ User-Adjustable Logic Level (+2.7V to +5.5V)
♦ Internal +2.5V Reference
♦ Software-Configurable Analog Input Multiplexer
8-Channel Single-Ended/
4-Channel Pseudo-Differential (MAX1090)
4-Channel Single-Ended/
2-Channel Pseudo-Differential (MAX1092)
♦ Software-Configurable Unipolar/Bipolar Analog
Inputs
♦ Low Current: 2.5mA (400ksps)
1.0mA (100ksps)
400µA (10ksps)
2µA (Shutdown)
♦ Internal 6MHz Full-Power Bandwidth Track/Hold
♦ Byte-Wide Parallel (8 + 2) Interface
♦ Small Footprint: 28-Pin QSOP (MAX1090)
24-Pin QSOP (MAX1092)
MAX1090/MAX1092
400ksps, +5V, 8-/4-Channel, 10-Bit ADCs
with +2.5V Reference and Parallel Interface
________________________________________________________________ Maxim Integrated Products 1
19-1640; Rev 2; 12/02
PART
MAX1090ACEI
0°C to +70°C
TEMP RANGE PIN-PACKAGE
28 QSOP
Ordering Information
Pin Configurations
±0.5
INL
(LSB)
MAX1090BCEI 0°C to +70°C ±128 QSOP
MAX1090BEEI
MAX1090AEEI
-40°C to +85°C ±1
-40°C to +85°C ±0.528 QSOP
28 QSOP
Ordering Information continued at end of data sheet.
Typical Operating Circuits appear at end of data sheet.