Maxim cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim product. No circuit patent licenses are
implied. Maxim reserves the right to change the circuitry and specifications without notice at any time.
12 __________________Maxim Integrated Products, 120 San Gabriel Drive, Sunnyvale, CA 94086 (408) 737-7600
© 2005 Maxim Integrated Products Printed USA is a registered trademark of Maxim Integrated Products, Inc.
MAX690T/S/R, 704T/S/R, 802T/S/R, 804–806T/S/R
3.0V/3.3V Microprocessor Supervisory Circuits
_Ordering Information (continued) ___________________Chip Topography
PART** TEMP RANGE
MAX704_CPA
0°C to +70°C
MAX704_CSA 0°C to +70°C
MAX704_C/D 0°C to +70°C Dice*
8 SO
8 Plastic DIP
PIN-PACKAGE
MAX704_EPA -40°C to +85°C
MAX704_ESA -40°C to +85°C
MAX704_MJA -55°C to +125°C 8 CERDIP
8 SO
8 Plastic DIP
MAX802_CPA
0°C to +70°C
MAX802_CSA 0°C to +70°C
MAX802_C/D 0°C to +70°C Dice*
8 SO
8 Plastic DIP
MAX802_EPA -40°C to +85°C
MAX802_ESA -40°C to +85°C
MAX802_MJA -55°C to +125°C 8 CERDIP
8 SO
8 Plastic DIP
MAX804_CPA
0°C to +70°C
MAX804_CSA 0°C to +70°C
MAX804_C/D 0°C to +70°C Dice*
8 SO
8 Plastic DIP
MAX804_EPA -40°C to +85°C
MAX804_ESA -40°C to +85°C
MAX804_MJA -55°C to +125°C 8 CERDIP
8 SO
8 Plastic DIP
MAX805_CPA
0°C to +70°C
MAX805_CSA 0°C to +70°C
MAX805_C/D 0°C to +70°C Dice*
8 SO
8 Plastic DIP
MAX805_EPA -40°C to +85°C
MAX805_ESA -40°C to +85°C
MAX805_MJA -55°C to +125°C 8 CERDIP
8 SO
8 Plastic DIP
MAX806_CPA
0°C to +70°C
MAX806_CSA 0°C to +70°C
MAX806_C/D 0°C to +70°C Dice*
8 SO
8 Plastic DIP
MAX806_EPA -40°C to +85°C
MAX806_ESA -40°C to +85°C
MAX806_MJA -55°C to +125°C 8 CERDIP
8 SO
8 Plastic DIP
*Contact factory for dice specifications.
**These parts offer a choice of reset threshold voltage. Select
the letter corresponding to the desired nominal reset threshold
voltage (T = 3.075V, S = 2.925V, R = 2.625V) and insert it into
the blank to complete the part number.
Devices in PDIP and SO packages are available in both leaded
and lead-free packaging. Specify lead free by adding the +
symbol at the end of the part number when ordering. Lead free
not available for CERDIP package.