1-866-9-OHMITE • Int’l 1-847-258-0300 • Fax 1-847-574-7522 • www.ohmite.com • info@ohmite.com
115
280 Series
Corrib
®
Fixed and Adjustable
Vitreous Enamel Power
Moun.
Part No. No. of Derat.
Slotted Elongated Resistors %
6110-81/2 6126-P-81/2 1 100%
- 6127-P-81/2 2 83%
- 6128-P-81/2 3 80%
- 6129-P-81/2 4 80%
Lugs for 300 Watt
Adjustable Corrib
RESISTOR HARDWARE
Thru Bolts Mounting Brackets for
300 Watt Corrib
Includes two each bracket, bolt,
washers (centering, mica, lock) and
nut. Note: Single unit mounting
contains one each bolt and nut; two
each all washers.
CHARACTERISTICS
Coating
Lead free vitreous enamel except for extreme
low resistance 35 watt models, and very large
models (750 watts and up), which are supplied
in Silicone Ceramic
Core
Tubular Ceramic
Terminals
Tinned lug with hole. RoHS solder composition
is 96% Sn, 3.5% Ag, 0.5% Cu
Adjustable Lug
Supplied with adjustable 300 watt models. Part
No. 1974-A or 1974-B
Resistance
Max. 63Ω for 300W version
Tolerance
±10% (K)
Power rating
Based on 25°C free air rating
Derating
Linearly from 100% @ +25°C to 0% @ +400°C
Overload
10 times rated wattage for 5 seconds
Temperature
coefficient
±400 ppm/°C
Dielectric with-
standing voltage
1000 VAC measured from terminal to mounting
bracket
To calculate
max. amps
use the formula √P/R
Corrib
®
resistors are ideal for applications involving
high currents at very low resistance values—as low
as 0.1Ω for the 300 Watt unit. These large, heavy-
duty resistors are designed to withstand frequent
start-stop cycles characteristic of motor starting,
dynamic braking and other similar applications.
Special order units are available to accommodate up
to 1500 watts.
Corribs
®
are manufactured with corrugated resis-
tive wire. To accelerate cooling, the wire is securely
fused to the ceramic core by the protective vitreous
enamel coating to improve durability. Corrib resis-
tors are hollow-core units which can be securely
fastened to chassis surfaces with thru bolts and
brackets.
FEATURES
•AlsoavailableinCentohmorSiliconecoating.
Consult Ohmite.
•Ribbedconstructionaidsinrapidcooling.
•Designedforequipmentrequiringlowresistance
loads at low ohmic values and high current capac-
ity.
•Especiallyconstructedformotorstarting,dynamic
braking, etc.
•RoHScompliantproductavailable.Add“E”suffixto
part number to specify.
Part No. Res. Part No. Res.
1974-A 0.40 1974-B 0.10
1
/16 wire 0.50
1
/8 wire 0.12
0.63 0.16
1.00 0.20
1.50 0.25
1.60 0.31
2.00 0.80
2.50 1.20
3.10
4.00
5.00
6.30
8.00
10.00
12.00
16.00
20.00
25.00
30.00
48.00
50.00
(continued)
