ABJ (BJ) Turquoise Switches
–5–
AECTB1E 201509-T
■ Characteristics
■ Operating characteristics
Note: The OP differs between the 1.2 mm and 2.3 mm dia. mounting hole types.
Item Specifications
Expected life
Mechanical life (OT: Specified value)
Leaf lever type: Min. 5×10
5
(at 60 cpm)
Wire leads side type: Min. 3×10
5
(at 60 cpm)
Other types: Min. 10
6
(at 60 cpm)
Electrical life (OT: max.) AgNi alloy contact type Min. 3×10
4
(at 20 cpm) (at rated load)
Electrical life (OT: max.) AgNi alloy + Au-clad contact type Min. 10
5
(at 20 cpm) (at rated load)
Insulation resistance Min. 100 MΩ (at 500 V DC insulation resistance meter)
Dielectric
strength
Between non-continuous terminals 600 Vrms
Between each terminal and other exposed metal parts 1,500 Vrms
Between each terminal and ground 1,500 Vrms
Vibration resistance (Pin plunger type) 10 to 55 Hz at single amplitude of 0.75 mm (Contact opening max. 1 msec.)
Shock resistance (Pin plunger type) Min. 294 m/s
2
(Contact opening max. 1 msec.)
Contact
resistance
(Initial)
AgNi alloy contact type
Terminal type: Max. 50 mΩ
Wire lead type: Max. 100 mΩ
(By voltage drop 1 A 6 to 8 V DC)
AgNi alloy + Au-clad contact type
Terminal type: Max. 100 mΩ
Wire lead type: Max. 150 mΩ
(By voltage drop 0.1 A 6 to 8 V DC)
Allowable operating speed (at no load) 1 to 500 mm/sec.
Max. operating cycle rate (at no load) 120 cpm (Long stroke type: 60 cpm)
Ambient temperature –40°C to +85°C
Unit weight Approx. 0.5 g (Terminal type)
Protection grade IP67 (except exposed terminal part of terminal type)
Type of actuator
8th digit of
Part No.
Operating Force
OF, Max.
Release Force
RF, Min
Pretravel PT, Max.
Movement
Differential MD,
Max.
Overtravel OT,
Min.
Operating Position OP
Pin plunger
4 1.23N 0.15N
0.6mm 0.12mm 0.25mm
Mounting hole: 1.2 type
5.5±0.2mm
Mounting hole: 2.3 type
7.0±0.2mm
6 1.96N 0.25N
Hinge lever
4 0.39N 0.029N
3.0mm 0.5mm 0.5mm
Mounting hole: 1.2 type
6.8±1.0mm
Mounting hole: 2.3 type
8.3±1.0mm
6 0.64N 0.049N
Simulated roller lever
4 0.39N 0.029N
3.0mm 0.5mm 0.5mm
Mounting hole: 1.2 type
9.8±1.0mm
Mounting hole: 2.3 type
11.3±1.0mm
6 0.64N 0.049N
Roller lever
4 0.39N 0.029N
3.0mm 0.5mm 0.5mm
Mounting hole: 1.2 type
13.1 ±1.0mm
Mounting hole: 2.3 type
14.6±1.0mm
6 0.64N 0.049N
Leaf lever
Wire leads
bottom type
4 0.98N 0.20N 6.0mm 1.0mm 2.5mm
Mounting hole: 3.0 type
16.0±2.0mm
6 1.27N 0.29N 6.0mm 1.0mm 2.5mm
Mounting hole: 3.0 type
16.0±2.0mm
Wire leads
side type
4 1.27N 0.22N 2.6mm 0.5mm 1.4mm
Fixed pin type
10.7±0.7mm
Mounting hole: 3.0 type
16.25±0.7mm
6 1.76N 0.26N 2.6mm 0.5mm 1.4mm
Fixed pin type
10.7±0.7mm
Mounting hole: 3.0 type
16.25±0.7mm
Long stroke type 7 2.45N 0.20N — 0.5mm 2.0mm 2.5±0.4mm
Partly to Be Discontinued: Agency standard type
Last time buy: September 30, 2016