OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

APFA2507QBDSEEZGKC

P1-P3P4-P6P7-P7
SPEC NO: DSAO0362 REV NO: V.2B DATE: JUN/27/2015 PAGE: 1 OF 7
APPROVED: Wynec CHECKED: Allen Liu DRAWN: F.T.Liu ERP: 1203014712
2.5x0.7mm RIGHT ANGLE SMD CHIP LED
LAMP
ATTENTION
OBSERVE PRECAUTIONS
FOR HANDLING
ELECTROSTATIC
DISCHARGE
SENSITIVE
DEVICES
Part Number: APFA2507QBDSEEZGKC
Blue
Hyper Red
Green
Features
z 2.5x1.0x0.7mm right angle SMD LED, 0.7mm thickness.
z Low power consumption.
z Wide viewing angle.
z Ideal for backlight and indicator.
z Package : 3000pcs / reel.
z Moisture sensitivity level : level 3.
z Tinned pads for improved solderability.
z RoHS compliant.
Descriptions
z The Blue source color devices are made with InGaN on
Sapphire Light Emitting Diode.
z The Hyper Red source color devices are made with
AlGaInP on GaAs substrate Light Emitting Diode.
z The Green source color devices are made with InGaN
on Sapphire Light Emitting Diode.
z Electrostatic discharge and power surge could damage
the LEDs.
z It is recommended to use a wrist band or anti-
electrostatic glove when handling the LEDs.
z All devices, equipments and machineries must be
electrically grounded.
Package Dimensions
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.15(0.006") unless otherwise noted.
3. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice.
4. The device has a single mounting surface. The device must be mounted according to the specifications.
SPEC NO: DSAO0362 REV NO: V.2B DATE: JUN/27/2015 PAGE: 2 OF 7
APPROVED: Wynec CHECKED: Allen Liu DRAWN: F.T.Liu ERP: 1203014712
Selection Guide
Notes:
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value.
2. Luminous intensity/ luminous Flux: +/-15%.
3. Luminous intensity value is traceable to the CIE127-2007 compliant national standards.
Absolute Maximum Ratings at TA=25°C
Electrical / Optical Characteristics at TA=25°C
Notes:
1.Wavelength: +/-1nm.
2.Forward Voltage: +/-0.1V.
3.Wavelength value is traceable to the CIE127-2007 compliant national standards.
4.Excess driving current and/or operating temperature higher than recommended conditions may result in severe light degradation or
premature failure.
Notes:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
Part No. Emitting Color (Material) Lens Type
Iv (mcd) [2]
@ 20mA
V
iewing
Angle [1]
Min. Typ. 2θ1/2
APFA2507QBDSEEZGKC
Blue (InGaN)
Water Clear
40 65
140
°
Hyper Red (AlGaInP) 80 110
110
°
Green (InGaN)
130
°
200 400
Symbol Parameter Emitting Color Typ. Max. Units Test Conditions
λpeak Peak Wavelength
Blue
Hyper Red
Green
460
630
515
nm I
F=20mA
λD [1] Dominant Wavelength
Blue
Hyper Red
Green
465
621
525
nm I
F=20mA
Δλ1/2 Spectral Line Half-width
Blue
Hyper Red
Green
25
20
35
nm I
F=20mA
C Capacitance
Blue
Hyper Red
Green
100
25
45
pF V
F=0V;f=1MHz
V
F [2] Forward Voltage
Blue
Hyper Red
Green
3.3
2
3.3
4
2.5
4.1
V IF=20mA
I
R Reverse Current
Blue
Hyper Red
Green
50
10
50
uA VR=5V
Parameter Blue Hyper Red Green Units
Power dissipation 120 75 102.5 mW
DC Forward Current 30 30 25 mA
Peak Forward Current [1] 150 195 150 mA
Reverse Voltage 5 V
Operating Temperature -40°C To +85°C
Storage Temperature -40°C To +85°C
Electrostatic Discharge Threshold (HBM) 250 - 450 V
SPEC NO: DSAO0362 REV NO: V.2B DATE: JUN/27/2015 PAGE: 3 OF 7
APPROVED: Wynec CHECKED: Allen Liu DRAWN: F.T.Liu ERP: 1203014712
APFA2507QBDSEEZGKC
Blue
P1-P3P4-P6P7-P7

APFA2507QBDSEEZGKC

Mfr. #:
Buy APFA2507QBDSEEZGKC
Manufacturer:
Kingbright
Description:
LED RGB CLEAR 4SMD R/A
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet