855-12930

McPC MediaLinX is a low-cost, IEEE 802.3 single-conversion, PC card media

converter. It converts 10/100 twisted pair copper to fiber, and is available in ST

or SC connectors in a variety of wavelengths (multi-mode and single mode). The

fiber port always operates at 100 Mbps FDX; the copper port auto-senses the

Installing the McPC MediaLinX (PCI Version)

Offering plug-and-play operation, the McPC MediaLinX comes ready to install,

utilizing power from the PC’s power supply. To install the McPC MediaLinX:

1. Turn off the PC

2. Remove its cover

3. Find an empty PCI slot

4. Align the McPC MediaLinX in the slot

5. Screw the the McPC MediaLinX into the computer casing’s bracket

6. Make sure the McPC MediaLinX does not extend past the edge of the case

7. Attach the keyed mini-power connector to the McPC MediaLinX

Whether using crossover or straight-through CAT5 twisted pair cabling, the

McPC MediaLinX will support both types of connections with AutoCross, a

feature which automatically selects between a crossover workstation or Pass-

Through connection depending on the connected device.

LED Indicators (PCI)

Each McPC MediaLinX includes two LEDs, located on the RJ-45 connector.

LED functions are as follows:

Installing the McPC MediaLinX (ISA Version)

Offering plug-and-play operation, the McPC MediaLinX comes ready to install,

utilizing power from the PC’s power supply. To install the McPC MediaLinX:

11. Turn off the PC

12. Remove its cover

13. Find an empty PCI slot

14. Align the McPC MediaLinX in the slot

15. Screw the the McPC MediaLinX into the computer casing’s bracket

16. Make sure the McPC MediaLinX does not extend past the edge of the case

17. Attach the keyed mini-power connector to the McPC MediaLinX

Whether using crossover or straight-through CAT5 twisted pair cabling, the

McPC MediaLinX will support both types of connections with AutoCross, a

feature which automatically selects between a crossover workstation or Pass-

Through connection depending on the connected device.

LED Indicators (ISA)

Each McPC MediaLinX includes two LEDs, located on the RJ-45 connector.

LED functions are as follows: